Beginner question about importing data from Access into Excel
For my work I have to write a lot of Word documents which are linked to
Excel spreadsheets for calculations and tables. I've got it all
figured out between Word and Excel, everything works. I have a series
of Word template documents extensively linked to a single Excel
worksheet which is where I do most of my work, the document really just
requiring formatting and a little bit of typing once my work in Excel
The next step for me, which would be enormously beneficial in terms of
time savings, would be to be able to link the Excel documents to an
Access database. This would save...Building New SBS2008 Server Hardware Question
I am going to spec out a new server for a client who will be running SBS2008
Advanced. They may or may not running the SQL on that physical box. Not
sure yet. They key thing they have been having a problem with in their
current SBS2003 is I/O speed of the HDs. (I think something is not right
with the controller) and now the machine is almost 5 years old. It's time to
upgrade their 15 user network.
So in your "dream world". What would you make sure you include in the
hardware and how would you configure it, including virtualizations. The
customer uses Dell ...VLOOKUP Question 11-14-09
I feel stupid but I cant figure out what is wrong with my forumla. It will
only return #N/A.
Here is the formula:
Where "List" is another tab on the same workbook and 6 is the column that I
want ito lookup.
You don't need those outside ()'s, but that won't matter.
My guess is that you don't have an exact match in List!A1:A404 for the value in
Debra Dalgleish has lots of notes on troubleshooting =vlookup():
When I go to open a file stored on the network "Network" is not listed by
default as a place to find and open Excel files in Excel 2007.
This is as moronic as the ribbon of abomination.
Yes, I can find out how to add "Network" as a default choice but it should
be their to begin with.
That, and the fact that Excel 2007 does not recognize conditional formatting
in spreadsheets created in Excel 2003 converted to to the ".xls" format make
it clear that the same geniuses who programmed Vista programmed Office 2007.
I cannot believe how dumb the design of both those...Before Update event question
If I am positioned on a new record (not yet saved) and I open a popup form
and then in the code for this form, I modify a bound field on my original
form and then close the popup form, does this trigger the 'before update'
event on the original form? This is what seems to be happening. I don't want
this event to trigger until I save the record or move to another record.
It seems that I have to postpone modifying the bound field until the 'before
update event'. This means that in the popup form, I have to save the value in
an unbound field and then move it to the bound...ListCtrl Question
am creating a CListView as my main View. It will display records from a
recordset. I am going to open my recordset, pull all the records out of a
certain table and insert them into the list view and then close the
When the user chooses to add a new record, I will pop up a dialog box,
create a local recordset and when the user clicks the ok button, I will add
the record to the recordset and then close it.
Here's the question, do I use InsertItem to add the new record to the list
view or do I rebuild the list view from the recordset again. Same with
deleting a record, I will...MFC Question
I have an MFC application that uses some business objects created a few
years ago in the form of "extension dlls." I've been updating it now for
quite a while. I recently got a request to develop a browser-based interface
to support telecommuting staff. I have the option to develop it in Java/JSP
as our company only wants to support Apache servers. But, to ease my pain,
they're allowing me to run an IIS server so I can program it in .NET.
My question is, how do I use my MFC business objects in a JSP or .NET web
application? I simply do not want to re-write them in anyt...Basic Question on autocomplete function
Hi everyone, my first time on the forum and my first thread. I apologize
if this is already located on the forum here. I tried searching, but
came up with many unrelated threads so I thought I'd give this a shot.
I am trying to auto complete a link to another worksheet by corner
dragging a formula over a ROW in one worksheet FROM data in the COLUMN
of another worksheet. In other words:
Worksheet 1: E9, F9, G9, should point to (respectively),
Worksheet 2: C2, C3, C4
The auto complete formula function does not recognize what I'm trying
to do. And I have to do this with t...Money99 Question
I recently started receiving the following error
message; "Product Information: Money was unable to
complete the operation. The Internet, banking, or
brokerage server you were trying to contact encountered an
error. Please try your call again later. (SMC)".
Running Win98SE, and no changes to program settings. How
do I correct? Thanks.
I've seen a number of posts on this issue recently. You may want to contact
support and verify if there is an issue going on with this version.
"George" <email@example.com> wrote in message
I need to delete all messages with a specific attachment name from our
I tried ExMerge having looked at a few tutorials/readmes/articles and it
seems to be doing the necessary, however there are a couple of
Firstly, our current environment (Exchange 2003 SP2) started life years
back as an Exchange 5.5 environment, and when I run the export phase,
many of the PST files have names based on the random directory name used
for the mailbox so rather than "Joe Bloggs.pst" I have "E76EC87.pst"
which is not ideal.
Second...Licensing question #3
I purchased more CAL for my Exchange 2003 (it is part of Small Business
version), do I need to apply these new licenses somewhere in Exchange server?
On Mon, 23 Oct 2006 07:12:01 -0700, Rob
>I purchased more CAL for my Exchange 2003 (it is part of Small Business
>version), do I need to apply these new licenses somewhere in Exchange server?
You do not need to put CAL's "into" Exchange, unless of course the
answer is different for SBS, in which case you should double check
with that partic...Exchange 2007 Send connector question
Testing out EX 2007 I have installed the mail, hub and CA role on one server
and the Edge role on another server. I have alos created an edge
subscription file and imported this file to the hub server, and i ra nthe
start-edgesubscription and got a success. Now If i want to create any
additional send connectors on the Edge server i get an error that says i can
only run this command on an AD attached machine, also i cant modify any send
connectors on the edge server.
So i created a send connector on the HUB server configured it and then
forced synchronization, thinking tha...Table question
I have WinXP. I created a Table in WordPerfect (6.1) and then opened it up
in Word (2003) so I could send it to some people who only have Word. In
both instances (WP and Word), there is a blank page at the end that I don't
know how to get rid of. Doing Delete on the last table page, or Backspace
on the blank page, doesn't work because the cursor is inside the table at
the end. Any suggestions would be appreciated. Thanks!
"Joy" <firstname.lastname@example.org> wrote in message
> I have WinXP. I...Counting question #2
I have a range of cells that I want to 'count' if the number is greater than
0 but less than 6. The cell # is F33 where I want the answer. The range is:
Q13:W13; Q17:W17; Q21:W17; Q25:W25; & Q29:W29.
What formula would I use? I've tried several but I keep getting error
>I have a range of cells that I want to 'count' if the
number is greater than
>0 but less than 6. The cell # is F33 where I want the
answer. The range is:
>Q13:W13; Q17:W17; Q21:W17; Q25:W25...Question about dialog.
I have an application which use several dialogs (CDialog1,
CDialog2,...). CDialog1 is popped up by a fuction call as following
func(...hWnd...)//hWnd is the main windows' handle
if (wndParent.Attach( hWnd ) )
CDialog1 dlg( &wndParent );
Now, in CDialog1, I want to start another dialog by using:
I got run time error.
"kathy" <email@example.com> wrote in message
&...One formula on multiple workbooks question
I update, track and save about 80 workbooks. They all have the same format
and formulas. However, occasionally I need to change the formulas, so I have
to update every workbook. Is there a way to save the formulas on one
workbook and have all the others refer to the formulas on this. If so, how
should I do this?
If you want to actually change the text of the formulas, no. If you want to
get data (stuff a formula returns, or text or numbers in a cell), use a
mvpearl omitthisword at verizon period net
...I'm sure this is a stupid question.
I have a field in my report -
=[lastname] & ", " & [firstname]
I'd like to suppress the ", " when there is no first name... some of my
contacts are offices/businesses/departments & don't have first names.
Any way to do this???
=[lastname] & ", " + [firstname]
There is a subtle difference between the 2 concatenation operators:
"A" + Null => Null
"A" & Null => "A"
Allen Browne - Microsoft MVP. Perth, Western Australia
Tips for Access users - http://a...Question re: Inserting Rows & Columns
I know that a row will always be inserted above the active row, but it is
visually confusing to me in which direction new columns are inserted. Are
they inserted to the right or left of the active column?
You could always put a11,b1 2,c1 3 and insert to find out for yourself
same thing on rows
Microsoft MVP Excel
"sheana" <firstname.lastname@example.org> wrote in message
>I know that a row will always be inserted above the active row, but it is
> ...Stupid question but......
Hello can any1 tell me how i get the little new mail
envelope icon to appear on the toolbar in the right hand
corner of the screen? I have just updated to a newer
version and it no longer does it
Thanks for any help you can give
Not a stupid quesiton Sarah. Lots of people have the problem. I hope MS
changes so their installation program checks for these problems but the
answer is usually here: http://www.howto-outlook.com/faq/missingenvelope.htm
> Hello can any1 tell me how i get the little new mail
> envelope icon to appear on the toolbar in the ri...Conditional Formatting Question #13
I have a spread sheet with 9 columns and an infinite possibility of rows
(however it currently has 107 rows). What I would like to do is have each
cell in column b check the row above and below and if it finds the value in
either of the corresponding rows are equal then both rows that have the same
value in column b are highlighted the same background color. I have tried a
couple of ways in conditional formatting but can't get the coloring to work.
Any help is appreciated.
Can you post a small sample to show us what you mean?
Is your first row of data row 1? I...createThread question
I am developing a DLL which exposes some APIs to the user.
Now one API needs to do following.
It needs to spawn 3 to 4 threads, which will wait for certain event
and update global data.
But API need NOT wait for all these thread processing and it should
return to the user.
Is there any issue doing this? i.e. Keeping thread running even
though Parent process (API) completed ?
Will created thread becomes zombie? or are there any drawbacks of this?
If I understand, you are asking that you are going to expose some APIs
which will launch a thread. Client will simply ...SMTP Connector Question
it has been mandated that we utilize our parent company's email domain name
for our email addresses. The problem I run into is that when I change the
default email addresses, email addressed to recipients outside of our
exchange organization with the same email domain name never get routed
outside our network. The exchange server bounces the email with an error
that the recipient could not be found.
Example: email address is email@example.com. Email sent within our exchange
organization to other users with @xyz.com works fine. email sent to
firstname.lastname@example.org who is in another exchange o...Question to readers
I monitor this group on a daily basis. I use outlook express as the reader
here. Instead of going through each post and find out which posts have unread
replies or new replies, is there any easy way to review these posts.
I have my view set like this....
View-Current View - Hide Read Messages.
Then after I've reviewed someting, highlight it and mark it as read, then it
won't show up the next time I synch.
This posting is provided "AS IS" with no warranties and confers no rights.
Do not send e-mail directly to this alias. This ...If question
This is a multi-part message in MIME format.
Is it possible to enter a range of numbers into an IF statement?=20
This is what I am trying to do:
if cell A =3D 0.8:0.999 then return 0.75 of cell B
I need to do this same thing 4 times in the same formula.
This is what I have so far:
After getting this far, I realize it's not going to work.
Any help or suggestions would be greatly app...