SFO question/help/advice?

I have a laptop that is connected to domain "A".  The user logs into this 
domain, collects email etc..

CRM is on a SBS 2003 box on its own domain "B"

The user can access CRM - using pass through authentication.

I have loaded SFO on to the laptop, I can see CRM online and SYNC to go 
offline does not give me an error.

However, when offline I get the standard "access denied" error.  I'm 
assuming that this is because it because I'm not logged into the same domain 
as CRM - and the synced user data is for B\mike and I am logged in as 
A\mike.

Does anyone have any suggestions to get around this? supported or not ? 


0
Mike
6/6/2005 2:02:23 PM
crm 35858 articles. 1 followers. Follow

0 Replies
350 Views

Similar Articles

[PageSpeed] 13

Reply:

Similar Artilces:

SFO sync.
Often people get sync. errors when going online. It's probably because things on the server change compared to the offline data. I wondered if all the changes made offline sync correctly except the ones listed in the sync error box ?? Jack Jack, The SFO synch process does not check to see if the data on the server changed since the user went offline. If it did, then the offline users update would overwrite the one on the server. This is minimized a little in that the updates are for only the fields that were changed, so if one user updated the name and another update the phone numbe...

free pdf email question
I have a report that I would like to email as a pdf attachment. I have "free pdf" installed that will create pdf files. It is possible of course to print the report to the "pdf printer", and save/send the pdf from within the free pdf application. Anybody who can drop a hint how i could fully automate the process ? I.e. open the report, save a pdf file to disk and email that through one vba code from within a form ? regards, Jos --------------= Posted using GrabIt =---------------- ------= Binary Usenet downloading made easy =--------- -= Get GrabIt for free from ht...

Delegation help of AD exchange objects
In the process of delegating control to a specific group for a particular OU. The delegation of AD is all well and fine. I can add, delete and change users. The problem that I have is during the creation of a user in the OU I can not add it with an Exchange Mailbox, the IS does not show and I am unable to finish the wizard. Also with a current user I am unable to change an email address or add a new email address. Any help would be much appreactiated. You'll need at least exchange view only permissions to be able to create the mailbox. "Jason Flynn" wrote: > In th...

Debt Reduction Question
I am trying to set up my debt reduction and even when I give it a max payment per month it wants to pay my credit balance off in the first month. I am using 2004. Seems I did this before in 2003 and didn't have this problem. Is there something I am forgetting to set. I do not have the account info to pay bal each period. >-----Original Message----- >I am trying to set up my debt reduction and even when I >give it a max payment per month it wants to pay my credit >balance off in the first month. I am using 2004. Seems >I did this before in 2003 and didn't...

move mailboxes question
Hi This weekend I'm setting up a new Exchange 2003 server. My current one is Exchange 2000 on W2K server box. I want to be able to move my mailboxes to the new server. During the installation of Exchange 2003 on the new server, there are two deployment options. Which one should I choose? The one that says Install the first Exchange 2003 server? Thanks jeff You will be deploying your first Exchange Server 2003 and joining an existing organization. Nue "Jeff" <Jeff@discussions.microsoft.com> wrote in message news:7D2FD2ED-AA68-4950-AD3E-B34D3F90E2E9@microsoft.com...

A question about Exchange 2003 direct-push technology in the UK
Hi, I'm just trying to get my head around exactly how Exchange 2003 direct-push actually works. Currently I have a blackberry server which acts as a link between our Exchange server and Vodafone. In order to set up Exchange direct-push (instead of blackberrys) does this work in a similar way? Ie, if we have a Vodafone account does Exchange push the email out to their network which then forwards it on to the device? Or does our Exchange server have to be externally visible on the Internet and the devices have to be configured to communicate with the server directly? Has anyone who&...

Eseutil Questions
Hi, I have an exchange2k3 server, the original configuration was for only one storage group and one meailbox store. The store got to be 150 GB. In an effort to reduce the size, I created 2 additional storage groups with a mailbox store each. I then moved 2/3 of the maiboxes out of the original storage group and into the other groups at about 1/3 each, leaving me with 3 50GB storage groups. Now, the first storage group (Original) is still showing 150 GB in size, I will need to run eseutil on it to reclaim my disk space. The questions I have are: 1) Roughly how long will this take to run...

SFO Offline Problem again
When i clicked "Offline" button, all those procedures work fine and i can see all Account/ contact. opportunities is download to my MSDE. But when i click "Account"/ "Contact" / "Opportunties" from my outlook, it got error "An error has occurred. For more information, contact your system administrator. " Anyone can help? Thanks in advance From my client Event viewer it shows: MSCRM Platform Error Report: -------------------------------------------------------------------------------------------------------- Error: Exception from HRESULT: 0x80...

"Display As" has Gotten Messed up
Is there a script to make all "Display as" fields just First name last name? I do not know why but some display as fields show completely wrong names! TIA the email display name? http://www.slipstick.com/contacts/emaildisplayname.htm first last format would use strFileAs = .FullName -- Diane Poremsky [MVP - Outlook] Outlook Tips: http://www.outlook-tips.net/ Outlook & Exchange Solutions Center: http://www.slipstick.com Outlook Tips by email: mailto:dailytips-subscribe-request@lists.outlooktips.net EMO - a weekly newsletter about Outlook and Exchange: mailto:EMO-NEWSLETT...

SFO with Office 2003
I am running SFO on XP & Office 2003 with strange CRM sync errors. 1. When I close CRM task from SFO (Outlook) I get the following message "This record is read only. Changes will not be synchronized with the Microsoft CRM system." The Actual End date is left blank. When I close tasks online they close without errors and they sync. 2. When I drag a CRM appointment from SFO I get the same message listed in 1. above and the time in CRM is incorrect. 3. When I close a CRM from SFO I get the same message that I listed in 1. above. The appoint seems to close properly & the Actua...

Time Scale Question
I am trying to show the time scale in months on the middle tier and on the bottom tier I am trying to show the number of weeks in that month and then start the count over for each month (ex: Jan 1 2 3 4 5 , Feb 1 2 3 4, etc.) I cant seem to get it to show up that way. Can anyone help Hi, I'm afraid that option is not present, sorry -- Jan De Messemaeker Microsoft Project Most Valuable Professional +32 495 300 620 For availability check: http://users.online.be/prom-ade/Calendar.pdf "MSP Beginner" <MSP Beginner@discussions.microsoft.com> wrote in messa...

Pivottable? Help!
This is a multi-part message in MIME format. ------=_NextPart_000_0006_01C518D0.D78D19E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi All, I would like to convert the table below to one that resembles the one at = the bottom... Anyone with any easy way to do this? Thanks! FROM THIS F1 F2 12345 VA7X 12345 40-5 12345 M5 =20 12345 CXT1 =20 12346 50-3 =20 12347 VM8X =20 12347 VM25C =20 TO THIS F1 F2 F3 F4 F5 12345 VA7X 40-5 M5 CXT1 12346 50-3 =20 12347 VM8X =20 12347 ...

=OFFSET question
Hi All, My first posting so thanks in advance for any help I have the following formula in J12 ='Summary-March2006'!$C$16 I tried the following but no go =OFFSET(J12,-7,2) Yet when I translate the formula into a literal string then it works well as follows =OFFSET('Summary-March2006'!$C$16,-7,2) What function can i use to convert the reference argument of the OFFSET function into text or string ? Thanking you kindly ! Regards I think the function you want to use is =indirect(). But that expects to see something that looks like an address--and you're bringing back ...

SMTP Relay Question
I posted something similar yesterday with varying answers, so I dont think articulated my problem very well. I will try again. We have been hosting Exchange through an out-sourced provider for the past 8 months and looking for bring Exchange 2003 Enterprise in-house. We have the Exchange server built and ready to accept mail. The MX records for our domain were pointed to our out-sourced provider until last week. The MX records now point to our internal SendMail Gateway. Mail comes into the SendMail Gateway and the gateway decides if the user is allowed. Currently no users are allowed...

Help on Graphs
i can never get the Xaxis to swtich with the Yaxis in the line graph mode i have this data 1 mol 350 2 mol 80 3 mol 67 i want the xaxis to show 350, 80, 67 but ti never does, no matter how i rearrange the colums. ?! thx -- SS2006 ------------------------------------------------------------------------ SS2006's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=28174 View this thread: http://www.excelforum.com/showthread.php?threadid=477015 Hi, Here is an explanation that should help, http://peltiertech.com/Excel/Charts/Y_CategoryAxis.html Cheers Andy SS200...

Date/Text Question
I am trying to put the current date in two seperate cells. Example: Cell B3 - I want the date to look like this: 23rd Cell D3 - I want the current month to be entered. I would like to put a formula in both cells so they will automatically calculate. Thanks in advance B3: =DAY(TODAY())&IF(AND(MOD(DAY(TODAY()),100)>=10,MOD(DAY(TODAY()),100)<=14),"th",CHOOSE(MOD(DAY(TODAY()),10)+1,"th","st","nd","rd","th","th","th","th","th","th")) (this one is from Chip Pearson) D3...

Need Help With Entering Current Time
I try to enter current time (Ctrl+Shift+, but there are no seconds. After i change cell to custom (hh:mm:ss), seconds are always equal to 00. How can i fix this problem? I need just insert auto time WITH SECONDS. Thanx in advance. ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~ View and post usenet messages directly from http://www.ExcelForum.com/ Indeed. Regards, Dave "Andy Brown" <andy.j.brown@ntlworld.com> wrote in message news:OctI%23mHfDHA.1888@TK2MSFTNGP12.phx.gbl... > Of course this method relies on your sy...

excel pivottable question
Does anyone know if the underlying pivottable columns can be formatted to wrap? I have the original spreadsheet that I am creating the Pivottable from formatted the way I want the underlying spreadsheet to look but, after creating the pivottable the underlying data seems to format itself. Thanks for any help in advance! -- Pia Hi Pia, You can format the resulting Pivot Table however you want after it's creation. So you would probably want to create a macro, in fact you might even be able to actually use the output from recording a macro if you avoid addressing specific rows. ht...

COleDateTime ,SystemTimeToVariantTime Issues Questions
Hi All- I have a need to use a COleDateTime variable which I pass into an ADO record set and ultimately goes into a SQL database. My app uses the COleDateTime::GetCurrentTime function. Multiple calls to this function return the same exact time until some temporal threshold is reached and then it jumps up to a new time. I used CTime::GetCurrentTime function which works fine. I then convert the CTime to system time and finally to a variant time with the SystemTimeToVariantTime function. As soon as I get it in the variant type I run into the same problem as mentioned above. Why is this??? ...

Synchronization of the SFO
What is the Story on Synchronization of the SFO over a WAN LINK? Does it WORK . Especially first time Synch. What if it's a BU Manager and his BU's DATA is over 100Megs Or even a Company Owner that wants everything OffLine It is recommended that the first sych be done locally since all the records are being created. Subsequent synchs can definitely be done over a WAN link. Is there any way your BU Manager arrange to do that first synch while connected directly? "Need Some Help" wrote: > What is the Story on Synchronization of the SFO over a WAN LINK? > &g...

a very simple question
I'm a new Excel user, using XP office excel. Well, I am trying to enter some text in the cells. Andormeda Galaxy is of type G - Sb. When I enter G- Sb, excel thinks it is some formula. The same thing with the coordinates like latitude and longitude numbers. How can I enter the data AS IS: and NOT AS A FORMULA. Thanks Shanks Type a single quote (apostrophe) before you type the test OR Format the cells for Text before typing best wishes -- Bernard V Liengme www.stfx.ca/people/bliengme remove caps from email <gireesham@yahoo.com> wrote in message news:1131137251.882877.193780@g4...

persmissions question
Hi, I wrote my website as dynamicly as possible due to the vast amoun of changes. So certain images are drawn by the application and then stored in a temp folder to which a page refers to. These drawings are saved as PNG. Now I have added a functionality where a report is generated based on given data and this report is also saved in the temp folder. The report is a PDF document. When writing this PDF document into the temp folder I get this error message: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, ...

Help! Can't enter duplicate tracking numbers
We just discovered that after 2 years of using GP, our FedEx and UPS tracking numbers are starting to duplicate, because they're reusing the numbers. We can't load them into GP via eConnect anymore because we get a duplicate record type of error. It seems that the Tracking Number field in the SOP10107 table is a key. Has anyone encountered this?? What, if anything, can we do?? -- Bud Cool Microsoft Certified Business Management Solutions Specialist, GP 9.0 Financials Currently supporting: GP 9.0, SP2 Bud, I just tested entering a tracking number already in the SOP10107 table ...

Calendar invites question......
I have a user that wants to receive a copy of any Calendar invite that her boss gets without the person sending the invite having to manually add her. Is this possible? If so, how would I go about setting it up? Thanks in advance everyone! JT Post this question in the outlook.calendering group and you will receive better answers. Look into delegate option under Outlook - Tools - options. You may find your answer there. Ibrahim "JT" <JT@discussions.microsoft.com> wrote in message news:602A2A7A-D72E-455F-845F-43A948CDB7DB@microsoft.com... >I have a user that wants ...

SBS 2008 Virtualization Question
Hi All, We have a volume license of SBS 2008 Premium...thus, I would like to install the Server 2008 license on a jacked up server, then activate Hyper-V so I can installed SBS 2008 virtualized. I am getting ready to order a Dell T610 with the following specs. Dual 2.13 Quad Core Processors 16 GB of RAM OS on RAID 1 (300 GB) DATA on RAID 5 (1 TB array) Redundant Power Supply Mainpine 2 port Fax board My questions are the following: 1) How does this hardware config look to all of you? Will this be enough? How much RAM should I allocated to the Server 2008 in Hyper - V r...