Unable to upgrade from Crystal 9.2 to Crystal 9.2.2
Since I am upgrading from CRM 1.0 to 1.2,I am going for Crystal 9.2.2
As per the direction in one of this discussion forum thread, I
downloaded the Crystal 9.2.2 upgrade (~176 MB file) from the Crystal
Deciosns FTP site.
But when I try to install it (on a developer machine) with my existing
9.2 License key , it fails saying that 'key is either invalid or
Any help is appreciated..
We had a similar problem back in February. It turned out=20
that our Crystal Designer 9.3 was actually a Crystal=20
Designer 9.0 upgrade from Crystal Designer 8.5 which had=20
then ...Problems after upgrading to Outlook 2002 / LDAP
After I installed Outlook 2002 instead of 2000 I have a
problem which occurs only when I synchronize with my
mobile phone. Outlook comes up with a message box " Cannot
contact LDAP directory server (81)". I don't use such a
server, the only adressbook are the Outlook contacts. The
other problem is that Outlook shows me of every contact
also the fax number and in the small window you cannot see
which one you choose, when you send an e-mail. And third
problem is, that I cannot use the organize button to
create a rule. It tells me that I don't have the
permissions for...New Version of Office for Mac???
When is Microsoft going to release a new version of Office for the
Mac? Office 2004? That's like 3 years old already. The PC counterpart
is up to Office 2007 already and all we get are incremental patch
updates. Has anyone heard anything in regards to the next major
release of Office for Mac? Thanks.
In article <email@example.com>,
> When is Microsoft going to release a new version of Office for the
> Mac? Office 2004? That's like 3 years old already. The PC counterpart
> is up to Office ...How to install UMDF-based class filter driver?
I used to have a WDM-based class filter driver and a setup application which
calls the "SETUPAPI.DLL InstallHinfSection" with the INF DDInstall section
passed into the function.
Now I am trying to port the driver to UMDF-based version. I modified the INF
as per WDK required, but I got an installation problem - the UMDF
co-installer "WUDFUpdate_01009.dll" can't be triggered by using the setup
However, installation via Device Manager with the INF is OK.
How should I solve such problem? Appreciate your replies.
what class are you ad...Error opening e-mail history items after upgrade from 3.0 to 4.0
I get the following error when opening e-mails on a customers history after
upgrade to version 4.0. I have found similar errors in version 3.0, but no
fix for 4.0. Anyone know what to do?
vent code: 3005
Event message: An unhandled exception has occurred.
Event time: 24.04.2008 12:48:24
Event time (UTC): 24.04.2008 10:48:24
Event ID: 5cc053bde0514d0cbadbb45bf5c3dd7b
Event sequence: 32607
Event occurrence: 10
Event detail code: 0
Application domain: /LM/W3SVC/5/ROOT-1-128534487130402833
Trust level: Full
Application Virtual Path: /
...Upgrading 2002 to 2004?
I am considering upgrading from Money 2002 to 2004 - will the transition
be seamless or should I expect any minor problems?
For a large majority of people it's seamless--assuming the same locale
version, in your case the UK release, I assume. Unfortunately, M03 and M04
have had more problems upgrading older files for some users than any
"Dave Barratt" <firstname.lastname@example.org> wrote in message
> I am considering upgrading from Money 2002 to 2004 - will the transition
> be seamless or should I expe...Mail account not being created for new AD users.
Hello everyone. I need some help. I have been searching for days to find a
solution for this problem. Hope someone here can offer some guidance.
I am running Exchange 2003 and AD on Windows 2003 server. For some reason, a
mailbox is no longer being created for users in Exchange. I am able to
create a user in AD, and I can see the user in the Exchange manager, but the
X400 and SMTP addresses are not being created. In fact, the E-mail Addresses
tab is missing in the Exchange manager, so I am not able to enter these
values manually. No mailbox is created, even after an email message is sent
to t...VISTA Laptop
I have an Acer Laptop.
I have checked my the "system info", it says it is x86.
But i have also checked the acer website for updates under the model number
and there are 64 bit drivers available for windows 7.
So is my lap able to use windows 7 64bit???
There is absolutely no way we can tell from what you've posted. What model
number? What processor? And, ultimately, what do you hope to accomplish? Do
you have >4GB of RAM? Do you actually need to run any 64-bit applications?
Frequently manufacturers have more than one version of a laptop mode...Upgrade AD when adding 2008 Server to Domain
We have added a new Windows 2008 Server (which will be a Terminal Server) to
our Windows 2003 AD Domain. Do we need to update the AD Schema? Our AD Policy
acts weird on the new server. Sometimes printers do not show up, then the run
command is enabled, then at times the task manager is enabled. We try and
lock down all of our TS Servers.
Thank you for your assistance.
> We have added a new Windows 2008 Server (which will be a Terminal Server) to
> our Windows 2003 AD Domain. Do we need to update the AD Schema? Our AD Policy
> acts weird on...R4 ds/dsi firmware-drivers de R4 Sdhc. R4 ultra, R4 new, R4 III upgrade, R4 v3
Hola,, aqui teneis una web donde encontre una recopilacion de firmware o drivers de las R4 Sdhc ,R4 Ultra,R4 New, R4 III Upgrade. R4 Dsi, R4 ui.
Pinchas en el enlace de arriba y en la parte inferior izda haces click en el boton DESCARGAR, aparecera un menu con muchos driver para distintas R4 DS.
Espero que os sirva de ayuda.
...Money 2005 SB
I tested Money Intl 2004 and entered a lot of data. Before 30 days I was
given the option of upgrading to several Money Editions, including Money 2005
SB. I choosed and bought this one but, when installing it and opening the old
file, the result was:
"Upgrading your Money file: Money cannot open this file because it was
created by an incompatible version".
Then I tried at least install the old Money Intl 2004 version in another
machine to get access to all my data but I was not given access to it because
it was expired!
How can I use my old data with the new Money SB version ...New line character
I have a table with data over 1 lak records . Few of these records have New
line characters appended to them. Is there any way to remove this new line
Thanks in advance
Message posted via http://www.accessmonster.com
Use an update query with a criterion like this, where XXX is the name of
Right([XXX], 2) = Chr(13) & Chr(10)
and an Update To expression like this
Left([XXX], Len([XXX]) - 2)
In SQL view it's something like
SET XXX = Left([XXX], Len([XXX]) - 2)
WHERE Right([XXX], 2) = Chr(13) & Chr(10)
...CRM queue error after upgrade
After upgrading to version 3 from 1.2 CRM seems to be working apart from the
mail queue it looks OK but no email is appearing. There is an error in the EV
Message: [Subject:'Private' From:'' To:'"'Support'" <email@example.com>'
CC:''] in mailbox: [CRMServerUrl:'http://crm/' EmailServer:'OFF2'
EmailAccount:'support' ForceReDelivery:'True'] has no single attachment.
The event source is the MSCRMExRouterService and the event id is 0
I have same error with system stuck on message with subject ...Creating New Files in Money
I am attempting to set up Money files for my kids. I have used MSMoney ever
since it came out, so I have not recently set up any new files. Each time I
attempt to create a file, it walks me through the setup and at the point it
tells me I am finished, the setup wizard closes and I get the MS dialog box
telling me that there has been an error and that Money will shut down and
asks to send an errror rpt to MS. I accept it and Money restarts and
immeidiately shuts down again with the same error report.
Try skipping the wizard. Try opening the sample file. You migh...Protocol de-encapsulation
I admit my question isn't strictly related to MFC... so I'm sorry if
posting it here irks someone. If you know of a more appropriate group,
let me know.
The problem is I'm designing a network analyzer and while reading from
the packet capture file (currently working with WinPcap files but
shall later add support for Netmon files too), I need to
programatically determine the protocol layers inside each captured
frame. Now, the question is what would be the best way in your opinion
to recognize successive protocols inside a frame?
I understand that some protoc...New Software Organization
Scott Swedorski the Founder of Tucows and Nicholas Longo the Founder
of CoffeeCup Software are starting a New Software Organization.
The cooperative is called the Organization of Independent Software
The Website will be located at: http://www.oisv.com
Membership will be Free and T-shirts will given away to the first 1,000
If you would like to know when the Website will be active and would
like to join please sign up for the mailing list at:
There will be Web forums, resources, Advisor Blogs from software gurus
and much much mor...Receiving new mail
On several occasions over the past couple of days, I have
received a new mail notification but have found no new
mail in my inbox. What would cause this and how can I fix
Rules deleting items, moving items to other folders, etc.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.
After searching google.groups.com and finding no answer, MJ asked:
| On several occasions over the past couple of days, I have
| receive...Modify USB device descriptor by filter driver
I want to build a lower filter driver to modify my USB device descriptor
before USB host controller driver get it. Can I achieve this goal?
Thanks a lot!
who do you want to see the changed descriptor? ie what affect do you want it
to have? do you want the host controller to change the way it enumerates
the device? or the client driver that loads on top of the enumerated device
sees the change?
This posting is provided "AS IS" with no warranties, and confers no rights.
"Abei" <Abei@discussions.microsoft.com> wrote i...33 Firmware Drivers R4 Dsi. R4i Dsi 42117
Drivers Firmware R4i Dsi . Firmware R4 Dsi nintendo
Firmware Drivers R4i Dsi , R4 Dsi , R4i-sdhc.com
...GP 8.0 is performing very slow after the upgrade from 7.0
We have recently upgraded GP 7.0 to 8.0. We are running GP on Citrix Server
(Dual P4-2.8ghz, 2.5 gb Ram, scsi drives) and we have a dedicated SQL server
(quad p4-2.8ghz, 2.5 gb ram, scsi drives) running sql 2000 sp3.
Here is what we have been able to determine on our own so far - when SQL
server is rebooted, everything is working perfectly fine, reports are being
generated very fast, but after about 30-40 minutes of heavy usage by about 10
concurrent users everything slows down considerably. During those 30-40
minutes the memory usage of the sqlservr.exe process grows from 280Mb...Upgrade to 10 Error (dbo.CN01500)
We are doing a test upgrade from GP 8.0 SP 5 to GP 10.0. We have
three companies that we are upgrading, and two of the companies have
worked fine, but on one of the companies we are getting an error:
ALTER Table dbo.CN01500
Ado Construct [PKCN01500]
Primary Key Clustered [CollectorID, CN_SignatureID]
When we click OK, it then pops up with a message saying that the
CN01500 tables could not be found. I looked at the other company
databases, and none of them have a CN01500 table either.
Any ideas? Has anyone seen something similar?
On Apr 16, 1:48=A0pm, KJ <kjj.....Reloading WDDM Display Driver Without Reboot
Does anybody know how to reload a WDDM display driver on Vista without having
to reboot? On XP with XPDM I used the ChangeDisplaySettings API to switch to
VGA mode and then back to accelerated mode. The same approach doesn’t seem to
work for my WDDM driver.
I basically just want to be able to copy in an updated version of the driver
and have Windows use it.
On Nov 10, 9:23=A0pm, Soren Dreijer
> Does anybody know how to reload a WDDM display driver on Vista without ha=
> to reboot? On XP with XPDM I u...Not showing any mail address for new users..
I have a problem with a Exchange server 2003, when i make a new user in AD.
The user don't get the default Reciptient policy from the Exchange Server,
the "Automatically update e-mail addresses based on recipient policy" is
And there is no mail box for this user in the Exchange System Manager under
Servers/"server"/First Storage Group/Mailbox Store/Mailboxes.
There is nothing in the event viewer, users that is already created can send
and recive mail. It's only new users and Distribution Groups that don't get
any mail address or mail box.....How do I do this in the new crap version of excel
I am trying to carry out the following instructions (taken from
Create a new folder named C:\ExcelData. The sample program will store
Excel workbooks in this folder.
Create a new workbook for the sample to write to:
Start a new workbook in Excel.
On Sheet1 of the new workbook, type FirstName in cell A1 and LastName
in cell B1.
On the Insert menu, point to Name, and then click Define. Type the
name MyTable and then click OK.
Problem is, on the Insert menu, there is no Name option. How am I
supposed to do this now.
On the Formulas tab,...Because the Exchange MTA is disabled, the store driver...
I suddenly have a huge problem on my exchange 2003 (running on SBS).
Trying to fix the not running Exchange MTA (Bad ideer, is it was ok in the
not running state DOH) service I uninstalled the SMTP service, and
reinstalled it! The result of that was a smashed Exchange server.
Now I can't get it to relay for any of my domains anymore, and everytime
someone send an email, the Event log on my server will tell me that It cant
deliver the Email because the Exchange MTA service is not running.
Could you please help me get it back up and running, or at least give me
some clues ...