I am doing a mailing using Outlook 2002, Win XP HE.
I have a message that says:
........ (company name)...............
I manually put the company name in there (unfortunately).
However it appears also in separate places later-on in the email.
I would like to have it automatically update later-on in the message based
on what I manually input for the 1st instance of it (as above).
Is this possible and if so how???
Tx a lot.
Sue, Tx for your reply.
I cannot actually use it with Word.
I do not have a list of contacts for this particular one but have to go
through an online directory and...How do I print a list of the directory contents
I need to print the disk directory contents. In DOS this was possible. Is it
possible in WORD? Thanks
No - but you could use the freeware Printfolders utility you can download
from my web site that will produce a text listing that you can open in Word.
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP
My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <...How to not see "on behalf of" in Outlook 2002 without Exchange
I have multiple email accounts in my Outlook 2002 setup. When I send email
from an account that is not the default account the From field shows "From
firstname.lastname@example.org on behalf of email@example.com". I there a way that all email
accounts send using their own name and not the name of the default account?
I do not use MS Exchange.
You shouldn't see that behavior if you use the Accounts button on the toolbar
to choose the sending mail account instead of the From field on the new
MVP - Outlook
*** Messages sent to my e-mail address wil...printing copies
under print options: Number of copies___. It will only print out 1 copy. I
say 5 and it still prints out 1. I am a new user of 2007 Excel
I suspect the problem is with the printer.
Try getting the newest driver
Bernard V Liengme
Microsoft Excel MVP
remove caps from email
"Val in Texas" <Val in Texas@discussions.microsoft.com> wrote in message
> under print options: Number of copies___. It will only print out 1 copy.
> say 5 and it still prints out 1. ...Error 553 "sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)"
Using outlook 2002 and mail returned as follows. Please
"553 sorry, that domain isn't in my list of allowed
You may need to authenticate to your outgoing server. To set this up, click
on "More Settings..." on your account page, then go to the "Outgoing Server"
This posting is provided "AS IS" with no warranties, and confers no rights
"Anthea" <firstname.lastname@example.org> wrote in message
> Using outlook 2002 and ma...Create row lower border that looks like "accountant single" underline?
I'm trying to format a spreadsheet so that a row has a lower border that
looks like the "accountant single" underline - something like this:
___________ __________ _________ ________
instead of a continuous line like this:
Is it possible to do this as a border? The accountant-single underline
(applied as a font attribute) only displays if there is data in the cell,
and I want it to be there whether or not there is any data.
Many thanks for any help with this.
"Edward Mendelson" <edward_mendelson@z...Blank instead of ""
In a chart I have a formula that either returns a number or "" in a cell. I
then have a dynamic range set which plots the values on a graph. The problem
is that the chart will plot the ""s as zeros as it sees something in the cell.
Is there a way I can have a true blank cell result coming from a formula?
If not how I can avoid the dynamic range seeing this as a zero?
Replace the blank by #N/A
So let's say your formula is =IF(this-test, B2,"") then use
When the test fails, this displays #N/A which...Ghosted print and print preview
I have a problem with printing in excel. The print and print preview options appear ghosted. I still can print through the print icon on the toolbar. Any suggestions???
...Print Dynamic Range
I have a basic excel template used for ordering parts. It runs from A1:N250
and I can print easily repeating rows 1:11 on each page (contains job details)
. Trouble is sometimes there may only be 10 part numbers requiring only first
page and I finish up throwing away trees by printing entire sheet! I know I
can reset print area each time am setting this up on Sharepoint for multi
users and need a macro/button to recognise number of items and print
accordingly. Any help greatly appreciated
Message posted via http://www.officekb.com
'change this cons...Window "look" keeps reverting
I'm having an issue that started apparently out of the blue. (i.e. - I can't
tie it into any particular event.)
I keep the "Windows and Buttons" look and color scheme set to Windows
Classic look, however, every time I reboot, it reverts to the Windows XP
look. It's a simple matter to go back into the Control
Panel/Display/Appearance and change it each time, but it's getting tiresome
and I'm looking for the root of the problem and the fix.
if you are interested in
only having the classic
then try going into servi...Purpose/Consequence of "Send As/Receive As"
We are currently set to migrate user accounts in active directory,
starting off with some new accounts for currently existing employees
and non-existing employees (as in they don't have a previous AD
account). Doing so, we will also be creating brand new Exchange e-mail
boxes for all the new users. What I want to be able to do is use
ExMerge to bring forth all the old e-mail in a users mailbox into their
new account. I have tested this ability and after much reading, I have
found that I apparently need Send As and Receive As both set to allow.
By default, I found that the "Everyone...loop thru collection and add "innerText" to nodes via XsltArgumentList
I add new nodes to an xmlDoc.
I want to add "innerText" to every newly-created node.
current XML file
Ideally, after a successful transform, the XML file should be:
Hello, I have a networking question. I have a print device with a
static IP address on one network. A computer on another network can
connect to the printer (NBT is enabled and so is LPR) and the drivers
are installed but cannot print. I know this is correct behavior but
want to know in detail why it seems to half work. I am guessing it
has to do with port 138,139 and 515 but not positive. Probably a
better question to ask a networking forum but hey.
can you access the printer through the printer IP address?
:D Just chill
-pls post your feedback on...Filtering is Automatically Marking messages as "Read"
I've defined a few rules in Outlook 2002 (i.e. XP) that
automatically filter e-mail from various e-mail accounts
to separate folders.
The problem I'm experiencing is that Outlook is also
marking these messages as "read," which means I have to
manually troll the folders to look for new messages.
I have verified that I do NOT have the "mark it as read"
flag set in the rules wizard.
I am producing a 50 to 60 page booklet using Pubisher
2003. The page format will be using 8.5 x 11 paper
folded in half. I need to print both sides of the
paper. How do I print the booklet so that I print half
the project on one side of the paper and the other half
on the back. Will publisher keep track of the pages so
that for example; that page 2 and page 50 print on the
same side/sheet of paper so when all pages are printed,
folded and bound the book reads correctly.
more info...I am using a single side printer so I have to
run the pages through twice ...Text Box #error 02-07-10
My text box works fine untill I open a new form and there is no data in
[OwnerID] I get a "#error" in my text box,
Control Source below!
=nz(DLookUp("[Payable]","[qryOverdueAll]","[OwnerID] = " & [OwnerID]))
Thanks in advance for any help with this......Bob
MS Access 2007 accdb
Windows XP Home Edition Ver 5.1 Service Pack 3
On Mon, 8 Feb 2010 10:55:27 +1300, "Bob Vance" <email@example.com> wrote:
>My text box works fine untill I open a new form and there is no data in
>[OwnerID] I get a "#error&qu...how to use "<10" as text value instead of numeric in COUNT.IF()
With the function =COUNT.IF(a1:a10;"<10"), i'll get the number of cells
with value less than 10.
But suppose there are cells which contain the text value "<10" (as a code
e.g.). How can i use COUNT.IF() function to count the number of those cells?
How about a different function?
In the USA version:
> With the function =COUNT.IF(a1:a10;"<10"), i'll get the number of cells
> with value less than 10.
> But suppose there are cells which con..."News" Command in Outlook 2003
The News cmenu selection is not available in Outlook
2003. Neither is the ability to add the command to the
menu. When I open the Customize panel, and select
Commands, there is no News entry in the Go portion.
To get the News command back, go back to the Programs tab in Control Panel |
Internet Options and change the default newsreader to Outlook Express. If
OE prompts you to make it your default newsreader the next time you launch
it, clear the "Always perform this check..." box and then click the No
"Mikey" <anonym...Outlook 2002 "Not responding" while creating a new message
I have MSOffice xp on MS xp Home version. I am having
Outlook 2002 go into the "Not responding". When I go to
It states/suggests that I update. When I check updates
there are none because I am up to date already. I am on a
POP3 dial up account with a.net ISP popping my mail to
Outlook 2002 from a mail.xxxx.com which is supported by a
mail hosting company. I would like to add that the .net
is still active when this occurs. When it occurs I am in
Outlook opening various folders, some with attachments
for reference while creating/composing a new message. I
am w...Check printing in GP 7.0
I have check payments for vendors, where I'm dealing with
LOCAL CURRENCY & FORIGHN CURRENCY. When I paid by check in
LOCAL CURRENCY then the amount in words prints perfectly
but if i paid by check in FORIGN CURRENCY then the amount
in word prints in numeric which i want to print amount in
words instead of numbers.
Please help me to print checks amount in words for FORIGN
CURRENCY as well.
Your suggestion would be appricated on above issue
...Excel BUG (All Versions) Excel Macro Margins using Print Preview
Where can i post this BUG? (Excel Macro Margins using Print Preview)
Is there an Excel BUG reporting site?
1) New worksheet, write something in it
2) Start recording a new macro
3) File -> Print Preview
4) Click on the Margins Button, the page margins will appear, so that you
can visually change and move them
5) Set one or more margins
6) Close the Print Preview
7) Stop the Macro
What happened is that in the VBA code there will be writtenthe following
..LeftMargin = Application.InchesToPoints(0.91)
..RightMargin = Application.InchesToPoints()
Where in second line ther..."Tiled" print setting.
I just want the page that I designed to print on one page! I can't change the
print setting "tiled" and as it is, it's printing on four pages all broken
It is possible that you have created your document on a paper size that is
not supported by your printer. Try changing your paper size to 8 1/2 by 11
and see if the print options are more to your liking.
"MissMarple" <MissMarple@discussions.microsoft.com> wrote in message
>I just want the page that I designed to print on one ...CHtmlView and Printing
The CHtmlView is giving me alot of head aches. Here is what I am doing. I
am opening an XML file (being formatted using XLST) in a hidden CHtmlView
and printing it.
Here is how the process goes:
1. I create the XML file on the fly.
2. load the XML file in to CHtmlView.
3. Once loaded I tell it to print the resulting HTML page.
4, I need to delete XML file after the printing is done. (this is the
I can't figure out how to find out when the CHtmlView is done printing.
CHtmlView::OnFilePrint is asynchronous. And CHtmlView doesn't tell me that
it is currently p...Problems with printing
I have an application, which has been working without problems for the last
7 years. The application has some printing capabilities. Now, we have just
gotten a new printer (HP Laserjet CM4370), and when I try to print, my
The app crashes in the print setup dialog even before I press OK. If I
select any other printer as default printer, the app doesn't crash. Then I
can show the print setup dialog without problems. But then, when I select
the CM4370, the app crashes again, even if I do not press OK.
Even if I choose to not show the print setup dialog, and j...client DIS"connect"
after installing sbs 2008, in order to connect clients you open a browser and
type "http://connect" in the address. following the directions will install
the client connect application on the client computer. THAT is the process i
want to reverse. part of what it does is MOVE all your user data (desktop
icons, taskbar, my documents folder... ANYTHING that was previously created
as well as any future modifications and additions) to the server. in order to
access that information, you have to be connected to the server as it is no
longer housed on your own box.
i need ...