Smartlist Export issue
I am implementing GP in the Gulf region where all the data entry is in
Arabic. Now in the smartlist, the report shows the Arabic characters without
any problem but when I export to Excel or Word it brings junk characters.
Is there any configuration to be done or what is the workaround.
I am using Arabic_CI_AS collation setting and it works fine with GP.
This issue is solved by installing Arabic Language Pack for MS Office.
> I am implementing GP in the Gulf region where all the data entry is in
> Arabic. Now in the smartlist...HRESULT #2
is HRESULT only used in COM interface programming?
I see this quite often in a COM module call.
I've seen it mostly used with COM and Windows message calls, but I think
HRESULT is just a long that is encode with attributes so you could likely
use it wherever. Here are some interesting articles:
"June Lee" <email@example.com> wrote in message
> is HRESULT only used in COM inte...Archiving problem #2
I have set up the 'Archive all messages sent or received by mailboxes on this
store' setting in Exchange 2003 to forward to the 'administrator' user. This
works fine, except that if an e-mail is sent directly to
'administrator@<domain>.com' it gets bounced back with the following message:-
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients failed.
I have tested this on several different Exchange servers and the problem
happens on all of them. I assume then that this ...Money 2007 Deluxe and Vista (Beta 2)
After having significant problems trying to get Money 2006 to run properly in
Vista, I decided to upgrade to 2007 yesterday. Now I can't get the install
program to run. After a successful download, the installer fires off and
imediately returns the message:
"This program has been damaged, possibly by a bad sector of the hard drive
or a virus. Please re-install it."
I'm sure that the hard drive is fine and there isn't a virus. Any
suggestions? I saw elsewhere a suggestion to try XP SP2 compatibility mode.
That doesn't seem to work either.
I...Gantt Chart issue.
I have had a number of users complain that they make customizations to their
Gantt charts (color coding, text and drawings) and from time to time their
customizations seem to disappear after a save and publish. Is this an issue?
has anyone else experienced this and if so, is there a fix?
Sorry forgot to mention, MSPS 2007 SP2...
> I have had a number of users complain that they make customizations to their
> Gantt charts (color coding, text and drawings) and from time to time their
> customizations seem to disappear after a save and publish....formatting issues
In Outlook, when a create a 'letter template' style
Signature (with right & left justified text), I am
experience a problem with the RIGHT JUSTIFIED TEXT lining
up properly. Esp when printing, even if on-screen looks
justified, some lines on the right side of my signature
look skewed. Can anyone help?
...Email Retention #2
I am looking for an email retention program.....any suggestions.
Try this link
> I am looking for an email retention program.....any suggestions.
...column that has general information #2
Basically I have a column that has 6 or 7 different values:
TS,NT,PB,NN,LD,NU. All I want to do is get the records that are TS, NS,
NU. This will dramatically decrease the amount of records I need to
plot. I have about 500 total, so this will drop it to about 250-300.
araki's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=15334
View this thread: http://www.excelforum.com/showthread.php?threadid=269594
why not simply use a filter. Or Ron's addin:
http://ww...Business Portal/FRx Report Issues
After generating a 15 page report in FRXReport Designer I am able to
view the entire report in IE. After the report has been published to
Business Portal on the page tabs show at the bottom and the report
gives the error:
The page cannot be found
The page you are looking for might have been removed, had its name
changed, or is temporarily unavailable.
We have a customer who is not currently using Multicurrency but they plan to
this year. They have several companies set up in GP but only one of the
companies will be using multicurrency. I believe that once multicurrency is
registered, it automatically applies to all companies within GP. Will they
need to assign a functional currency to all companies in GP?
You are correct Sue. They will have to assign the functional currency
in all companies.
MCP-GP, MCT, MVP
East Coast Dynamics
Thanks Frank - for the comp...How do I add a second axis to a graph with 2 data series?
I am creating a graph in Excel 2002 with 2 data series (bone mets and no bone
mets). I need to add a second y-axis to the graph, but when I follow the
excel Help directions, it removes one of my data series from the graph (ie,
it can no longer be viewed).
Is it possible that the two scales are such that one series is on top of the
Try formatting one y-axis and change the value of Min.
"Laura" <Laura@discussions.microsoft.com> wrote in message
>I am creating a graph in Excel 2002 wit...Outlook issues...
So it seems like I have royally screwed up my outlook. Here are my
1. I set up my outlook from gmail and at one point it stopped
importing all my old messages. I tried to delete the profile and it
didn't work so I set up a new gmail account which worked. How do I get
rid of the old inbox that no longer receives messages? Its the one
that is under personal folders?
2. My outlook is automatically deleting emails. Sometimes if I'm fast
enough I can read them but other times they are just deleting. I have
no idea where the emails are going or how to make it stop. I...can I add 4/5 and1/2 to get 6/7 as in 4 of 5 + 1 of 2 and get 6 o
I am trying to keep a running total by month of sales vs calls and the data
is entered as 4/5, etc. Is this possible in Excel?
> I am trying to keep a running total by month of sales vs calls and the data
> is entered as 4/5, etc. Is this possible in Excel?
Yes, entering 4/5 is a possible way of entering either 4th May or 5th April,
depending on you...usability issues
What are the usability issues for new users in using Microsoft Access-- Message posted via http://www.accessmonster.com Perhaps you could start by defining what you mean by "usability issues"?-- George Hepworth2007 Access MVP"reema via AccessMonster.com" <u32346@uwe> wrote in message news:6fc3590b2d647@uwe...> What are the usability issues for new users in using Microsoft Access>> -- > Message posted via http://www.accessmonster.com> usability issues mean what are the problems in using Microsoft AccessGeorge Hepworth wrote:>Perhaps you could start b...Budget Problems #2
I just installed Money 04. I set up a budget along with
monthly transactions. When I run a monthly budget
report, the budget number does not show up, only the
actual. Only two categories show correctly. Has anyone
else had this problem?
Take a look at next month's report where your figures will be. The monthly
transactions in bills/deposits possibly start in a month's time if you've
already made the transactions this month, and are thus reflected from the
next budget period.
Glyn Simpson, Microsoft MVP - Money
Check http://support.microsoft.com/default.asp...Negative amounts showing for investment transactions #2
I have been on Money Deluxe 2005 for a while now. Last week, I was looking
at my investment accounts and noticed that the cash accounts associated all
have negative cash-on-hand. Upon further review, I found about 15 sale
transactions that looked just fine in the Investment Transactions registers
but were marked as payments, rather than deposits, in the related Cash
Transaction accounts. I did a standard repair but that didn't seem to help
and it showed no broken records when I viewed the log. I then voided each
of the incorrectly recorded transactions and re-entered them manually. Al...Burning Optical Media Issue
I have a copy of CopyToDVD mainly because it has a command line
interface. That way, I was able to use a Process class object to use
it to burn CD/DVD media.
I have found that if I browse the media with the Windows Explorer
just after being burned it says the disk is empty. I have to eject and
reload the media TWICE before windows sees that there are any files
I would like my burning app to be able to verify the burn by reading
all of the files on it, but just as windows doesn't see any files
there until I reload it twice, my app doesn't either.
It is a pain to ...MultiCurrency-
the functional currency of company is PKR(Pakistani rupees).i create &
receive/invoice the purchase order in USD Dollar with exchange rate .at
the time of payment when i apply the document againt an invoice the problems
1.The exchange rate in PURCAHSE ORDER & RECEIPTS are zero .
2. when i only partial pay the vendor remaining amount convert into realized
gain or loss account
3. when i fully paid the amount the all amount is credit in to realized
gain or loss.
...OFFLINE ADDRESS BOOK SECURITY ISSUE
Hello. I am running Exchange 2003 SP2 on Windows 2003 R2. I have multiple
GALs in order to secure off certain employees, and that works just fine;
users only see the people in their GAL. The problem I have is that when I
configure offline folders, users can see EVERYONE. I have secured the OAB
and the GAL so that only the respective security groups can see their address
list, but the OAB doesn't seem to respect those permissions. I have also set
the UseOAB property through adsiedit, but it still doesn't work.
The global address list is a compilation of eve...bad mail #2
I'm not sure if I'm being paranoid, but I have a feeling
that the amount of bad mail is increasing every day.
We are small network with one 2003 domain/exchange server
and some 10 users. I would say we are "average" mail
users and I haven't notice this before until my backup
failed several times trying to backup bad mail folder.
This was never an issue before.
I'm not sure if somebody can advise me on this one, but
if somebody has any clue what is the "healthy" amount of
bad mail and is there one at all?
The badmail folder is normally NDRs that we...outlook issues
I have a user running XP SP1 with all the patches. She is
also running Office 2k SP3. She got an error message
indicating that the application was hung......
$zAppName:Outlook.exe $zAppVer 184.108.40.20604 $zModName:
All she does is click on "close" and nothing. The
application keeps right on going.
...CRM issues related to AD account deletion
We're having CRM problems related to an account deletion in AD:
In CRM, we removed an ex-employee's license and disabled his account. The
same user's AD account was then deleted, as well. Now we can't make any
changes to CRM records' share rights if the record was previously shared to
this user (error message says "The selected object cannot be found. Verify
that the object exists in both the database and Active Directory."). This
includes sharing/unsharing records to other users, without attempting to
change the share rights to the disabled user. Additional...Formula to count no. of months between 2 dates
What is the formula to display the number of months between 2 dates?
Have a look at this site:
„Melissa” ezt írta:
> What is the formula to display the number of months between 2 dates?
On 23 Mar, 08:27, Melissa <Meli...@discussions.microsoft.com> wrote:
> What is the formula to display the number of months between 2 dates?
I forgot to mention I am using Excel 2000.
I us...Exchange 2003 "send as" issue.
A client of ours uses SBS 2003 and would like certain users to be able to send "as" other users. They can "send on behalf" however the email then states "sent by xxxxx on behalf of yyyyyy" which is not what they want. They want the email to appear as though it has come from another user. Administrator can achieve this yet no other users can - even when full permission is granted to the mailbox etc. We have previously been able to do this with SBS 2000 (or full Exchange 2000) yet it appears to be different in 2003. The error reported is "you do not h...User Authentication #2
I am having problems with one of my users. When he was using CRM he jsut
left his desk for five minutes came back and saw that he was having an
"Authentication Error". Since then I have reassigned roles and even
deactivated and activated his users. Unfortunately the problem continues.
Please urgently respond with solution.
did you anything with his account in AD?
Please also be more specific about error details - which version of CRM
are you using, set show developers error on, etc.
Faiz Amir wrote:
> Dear All,
> I am having problems with one of...