hyperlinks in emails
I was sent some messages with hyperlinks in them and can
see that the url address is present but when I click on
them the hyperlink, it won't open up. What is the
problem? Please help. Thanks.
...Cannot send e-mails located on Draft folder
I have Outlook 2003 installed and it was working normally, until I installed
Microsoft CRM Client for Outlook 3.0.
Now I cannot send or open e-mails located on the Draft Folder.
Anyone can help me?
When you state 'cannot send or open' what do you mean? Do you receive an
error? What is it?
This posting is provided "AS IS" with no warranties, and confers no rights.
"wanny" <firstname.lastname@example.org> wrote in message
> Hello everyone!
> I have Outlook...Email #20
I've used every help resource I can find to send Email
from Outlook 2002, but each time I try, I get a "The
operation failed. An object could not be found" error
message. Any ideas? Thanks
...Outlook Client in Another Domain
I was hoping to be able to use MS CRM Outlook client using RPC over HTTPs
but now it looks like that is not possible. I was wondering if it was
possible to use the Outlook client on a desktop that was a member of a
Yes, for the desktop client this is possible.
Make sure that the CRM website is in the trusted locations in IE.
It is even possible to use an outlook client which retrieves emails via
For the laptop client I am not sure, because when you go offline it tries to
do a replication, and I believe you need to be a member of the domain to do
that....Slow email sending
I have a user with the outlook client that is complaining that emails are
not being sent out timely. He will create an email activity and it may take
hours for it to actually go out. He has checked the outbox and sent items,
and neither place shows the email. We have found that if you goes on-line,
and then back off-line, he will get a sync error and the email will go out.
Is this normal? What can I do to make the emails go immediately? Where is
the email while it is waiting to be sent?
Sounds like he is sending email while "offline". If that is the case, the email
...Center of Mass
i have a 20*10 matrix with positive integer-values and I have to calculate
the center of mass of this "volume". Should be easy in Excel...but what's the
easiest way of doing it?
What do the integer values represent, and what does the matrix represent?
MS Excel MVP
"Gerhard" <Gerhard@discussions.microsoft.com> wrote in message
> Hello together,
> i have a 20*10 matrix with positive integer-values and I have to calculate
> the center ...Lots of clients getting "Delayed Notifications"
This morning lots of clients are complaining that they are getting 'delayed
notifications like the ones below.
I go to the the SMTP connector (Exch2000) and under "Default SMTP Server"
and I see "Queues".
Which specific information should I be looking for to determine what's
causing these massive number of 'delayed notifications' ?
This is an automatically generated Delivery Status Notification.
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipients has been delayed.
"Marlon ...Changing the "reply to" on emails
I have several support reps who monitor a queue for customer support requests
and then reply to the customer using a CRM email activity. We want any
customer reply to our email to be sent to the email address asssociated with
Currently, the emails we send via the CRM use the support rep's email
address for the "sent from" and "reply to" addresses. The problem is that
when the customer replies to that email, the reply is sent to the support
rep's outlook vs back into the support queue. The support rep could be on
I tried settin...Testing email
I have a situation I need to troubleshoot. I'm trying to send mail and it
keeps getting rejected from specific address. Is there a way to determine if
the error is on our end or theirs. Our configuration is such that we have an
spam/antivirus server that scan all incoming/outgoing mail after it leaves
exchange or before it hits exchange. I believe the error is on the
receipients end. Is there any way to prove/test this before I contact the
receiver. Is there anything such as a tracert for email or something similar.
uhm.... well for starters you might consider POSTING the erro...Multiple email accounts #10
How can I have my email go to my email box and my wife's
go to here email box in outlook 2003. currently they all
go to my email inbox. i would like to not get here email
and it go directly to her folder
Not enough information. Do you have separate email accounts or only
aliases? Are you using Outlook profiles or Windows profiles? Have you
tried moving the mail via rules? Do you want her mail to be unviewable by
you or just in a folder with her name?
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus ...Email, Remote Access, & Backup issues
I setup a new SBS2k3 Standard for a client that was all
I'm new to this myself.
Here are some issues/questions i was having
1) Each client, not all, just some, have personal email
accounts, pop3. Using the wizard, i told it to not
change email settings. This works great, i setup the
pop3 accounts and hit send recieve, getting all their
mail. Sending is another problem though. All sent email
sends out from domain.local, even though Outlook is
configured for each individual mailbox. Also, they can't
send to certain domains, seems mostly to be personal
domains...Outlook 2003 receiving Email but not sending
Yesterday I installed Outlook 2003 on a new laptop that is running Windows 7
on a 64 bit core i7. After some help from this forum I was able to overcome
the MAPI32 error, thanks NEO.
Now I am able to read email from my domain's email account but it will not
send. I have Outlook 2003 on my desktop and it works fine. I duplicated the
settings to my laptop and can not get an email to go out. Here is the message
Task 'mail.*****.com - Sending' reported error (0x80042109) : Outlook is
unable to connect to your outgoing (SMTP) server If you continue to receive
this mess...SDK against the offline SFO client
There has been a lot of posts about this, and apparently this is not a
How the hell are we supposed to create great add-ons for this product if
those add-ons do not work when the client is off-line? There is a huge
amount of scope for third parties to enhance the base product, but it is a
waste of time if the enhancements do not carry forward to off-line mode.
Hey! Someone stole the wheels off my Ferarri!!!
Right now there is no replication method to bring your code down from the
CRM server. As discussed getting customizations wor...Incorrect NDRs & Miss-Addressed Email Queues
Yesterday morning the Unix box our Exchange system hands off
Internet-bound email to was having a problem, as initially evidenced
on the Exchange side by the filling up of remote SMTP queues. As part
of the troubleshooting process I restarted the SMTP virtual server.
When I did this it flushed all of the email out with NDRs indicating
that it 'Could not deliver the message in the time limit specified.'
These emails had been in the queue less than 12 hours, so that message
seems a little pre-mature. The settings for this are default, and I
believe that it should wait at least two days b...email report based on unique ID
I need to email reports based on the unique ID in the page header of the
report. I have written some code in VB and it's emailing the report but it's
emailing the entire report instead of just the one page unique to the
employee, it's also prompting me to enter the unique ID for each employee. I
just need it to cycle through the query and email the appropriate page to the
correct employee. Below is the code I'm using. "Pernr" is the unique ID and
the report name is "rptSI".
Any help would be very much appreciated. Thanks!
Private Sub cmdRunRep...No Sound On Terminal Client
I have a Win2k8 Terminal Server. The clients want to use audio playback.
My problem seems to be that the server board (TYAN S-2332) does not have
audio. Thus, no drivers are installed. No sound is delivered to the clients.
What can I do?
Thank you for your time.
...mail merge to email not working
Operating System: Mac OS X 10.5 (Leopard)
I create a mail merge in word 2008 on mac but can't select option for email at the end. Date source Xcel file, works great on everything else. I search the net for similar probs, but they all show a different wizard offering email destinations. I don't see that until the last option, and still cant select it.
Entourage must be set as your Default email program, or the option won't
On 14/04/10 1:28 PM, in article 59bb6e66.-1@webcrossing.JaKIaxP2ac0,
"Reg_on_a_Mac@officeformac.com" <Re...HTML emails #2
How can I send an email that contains html and have it show
and it sends
I think the system had translated it for you as a standard HTML format.:)
I think you should post those format as below:
<html >hello!world!< html> ,
Well , we just add a blank in our <> label.
"Mike" <email@example.com> wrote in message
How can I send an email that contains html and have it show
I...Microsoft Outlook Email
In the middle of receiving E mail,Outlook stops and
generates an error report,followed by a shutdown. Does
anyone know how to fix this? Thank You.
Probably, but given the lack of details you provided, it will be hard to
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to the
Swen virus, all e-mails sent to my actual account will be deleted w/out
After searching google.groups.com and finding no answer
Al <firstname.lastname@example.org> asked:
| In the middle of receiving E mail,Outlook stops and
| generates a...Mass Delete
Some how I have created multiple listings for the same item. I think I made
any error in importing a csv file. For example I have over 100 separate
items with the same SKU (STNP-1) and desription. Is there a way to delete
these as a bunch and not each single one. Thanks for any advice.
Each item has a unique ID called the primary key even though you may have
entered all of the other information multiple times. Pick one ID, call it X,
to keep and delete the others with Tom's statement with the additional
qualifier" AND ID <> X".
&g...How to mass convert Filename.eml to Filename.msg while keeping them in original subdirectories?
Does anyone know of a utility that walks an
explorer directory and subdirectory converting
every .eml file into a .msg file?
My company has used Outlook express for 4 years,
and we often copied emails to various Windows
Explorer directories. After copying, we would
often rename the .eml file -- for instance change
"please help.eml" to "John Doe needs help with
Outlook Express crashes.eml".
Each e-mail copied resulted in an .eml file like
"Hey Santa, here is my xmas list.eml"
Find File .eml reveals that we have 3000 such
files spread over 100 subdirectories.
...Multiple Stores and HQ Client
We have 12 stores all together that need to synchronize with HQ Server, this
works fine if we alternate each of them to update once an hour, one store 5
minutes after the hour, next store 10 minutes after the hour and so on. I
know we can also synchronize each of them for every five minutes or whatever
interval throughout the hour. The first situation does not synchronize often
enough because we have to release credit holds and things of that nature; the
second solution bogs down all the servers and makes doing other store stock
checks and what not next to near impossible. Is there a...Why is the scheduled task on clients set to run every 15 min?
On both XP and Win7 I've seen that the scheduled task that that executes
TriggerClientJob.dll runs every 15 min even though the protection group is
set to run every 6 hrs. Now although the schedule is running every 15 min, I'm
only seeing a sync every 6 hrs. But I'm wondering why that is firing every
15 min and not set closer to the sync time. It's not causing any problems I'm
just wondering why it's set like that.
Good observation. For a roaming client, this helps poll the connectivity.
The way the check works is that it tries every 15 minutes and ex...Stopping emails with .exe attachments?
Running Ex2003 on 2003 Server in a 2000 Domain.
Is there anyway to stop emails with certain kinds of
attachments (example .exe )?
Nothing native will do this; there's attachment blocking in Outlook, but you
shouldn't wait til mail gets to the client to handle this. The best way to
deal with it would be to get Exchange antivirus software, which you should
be running anyway...it can do this and more. Trend ScanMail or Sybari
Antigen would be good to look at as they're probably the best out there. You
can get a free 30 day eval of Scanmail from the Trend site.
For a list of attach...mass mailing causes system to become a bottleneck
We running exchange 2003, once a week we send a mass amiler to roughly 1000
recipients with a 1mb attachment. Whenever this happens the exchange server
and internet because a bottleneck and end users are not able to do any work
for hours at a time. Is there any other method we can use to send these
messages? Is there anything I can do on exchange that would prioritize the
Any help would be appreciated.
How are you sending this message? Are you using Outlook and BCC? You can
defer the sending of the message by selecting Tools > Options > Do not