Pulling data daily from a differently named report everyday
I have a spreadsheet where I use formulas to pull data from multiple
reports on a shared server everyday. What I do is to save those
reports under a certain name everyday since the formulas have to have
the static report name in them to pull data. (For example, A1 may pull
data from c:\reportfolder\reportA, B1 may pull from c:
\reportfolder2\reportB, etc). In these report folders our IT group
runs a new report in it everyday but of course they change the name of
the report every day (to reflect the date) . . so in the reportfolder
there will be "reportA-3-12-2009", and "...Different margins on different pages
I am setting up a template for letters at work. The first page of our
letterhead has one ste of margins and all subsequent pages will have a
different sent of margins.
I know that section breaks can be used, but if staff copy and paste text
from existing letters into this new template, the section break moves.
Is there any way of locking the section break to the page? so the pasted
text goes over the top of it?
You could setup your document with a 'different first page' layout. That allows the first page to have a different set of margins to
the rest o...Different values for error bars in series
In Excel 2007, how do you put in different error bar values for each data
point in a series? So far I am only able to put in one value for all in my
See Jon's blog on the subject.
On 06/04/2010 15:52, wdwind1 wrote:
> In Excel 2007, how do you put in different error bar values for each data
> point in a series? So far I am only able to put in one value for all in my
> bar chart.
Andy Pope, Microsoft MVP - Excel
...A Different CRM for GP
We are pondering the idea of implementing MS Dynamics CRM. However, I am
curious whether anyone else has had success in integrating a different CRM
product with GP 10.0. It's not that we don't like the MS product; I just
like to ensure I have covered all bases.
Our partner does not have any other recommendations as they have not worked
with any other CRM applications.
Any information would be greatly apprecaited.
GoldMine is a good product, very mature, and easier to maintain table
structures. There are links to GP but I cannot remember the fir...Same column, different cell width at different row
I have tried inserting a break and split, didn't work. I just want to
separate the top half of a page with the bottom half so I can apply different
cell width on the same column. Or how would I be able to do this? Same
column but different cell width.
You can't do that.
Microsoft MVP - Excel
Pearson Software Consulting, LLC
"Glenn Chung" <GlennChung@discussions.microsoft.com> wrote in
>I have tried inserting a break and split, di...2 users access calendar online with different rights
user A wants to give user B permission to see, add and edit entries in
user B is able to see, but not to add or edit entries at the moment
in outlook itself its working. user B can open the folder calendar of user A
and make entries and change entries
what have to be done that this is possible also with web access exchange ?
On Thu, 26 Oct 2006 14:09:29 +0200, "Mike Schwarz" <firstname.lastname@example.org>
>user A wants to give user B permission to see, add and edit entries in
When using the Fixed Asset module, I am finding some small differences when
compared to the Depreciation calculated by the External Accountants for tax
purposes. Client would like to match exactly to the amounts calculated by
external accounts. What is the best way to fix this issue?
Need more info Patti. What are the depreciation methods/settings that
are creating the differences? Does this occur on every asset or just
MCP-GP, MCT, MVP
East Coast Dynamics
get your gptip42today at www.gp2themax.blogs...Dates Difference
I need to get the difference between 2 dates (in number of days), how
do i get that in vc++? I have used the DateDiff function in asp but
couldn't find anything like that.
Also, how can i convert string to a date?
thanks in advance
>I need to get the difference between 2 dates (in number of days), how
>do i get that in vc++?
Convert (if the dates aren't already in this format) the dates/times
to FILETIME and subtract the values.
>Also, how can i convert string to a date?
Try COleDateTime::ParseDateTime or VarDateFromStr.
MVP VC++ FAQ: http://ww...Want to display value and difference on one chart
I am trying to create a chart that displays x and 10-x on the same chart. I
want the chart to show a meaured value and the difference of that value to 10
in a different color.
On Wed, 6 Aug 2008, in microsoft.public.excel.charting,
JMH <JMH@discussions.microsoft.com> said:
>I am trying to create a chart that displays x and 10-x on the same chart. I
>want the chart to show a meaured value and the difference of that value to 10
>in a different color.
Use your spreadsheet to calculate the values, then use the chart to
graph them. Never try to use a chart for calculation.
...Sending from 2 different computers
I have Outlook 2003 on my desktop at home and 2002 on my laptop while
traveling. My server is Comcast. I would strongly prefer to use
Outlook (rather than Comcast's webmail) on both computers.
I have configured Outlook on both computers to receive email. I can
also leave a copy on the server so it can be downloaded again later on
the other computer, assuring that I always have copies of all emails
no matter which computer I'm using.
Problem is I can't send from my laptop. I've tried Comcast's
instructions for configuring Outlook 2002 for use while traveling, but
it doesn&...Different shape width in different views in Excel 2007??
In Excel 2007, I create a shape in "Normal" view and set its width to
any value (e.g. to 15cm). Now I change to "Page Layout" view and guess
what... the width now shows up as something more than 16cm??!
(The width property as points in VBA changes accordingly.)
Switching to "Page Break View" will result in one more different width
Is this "just" a big bug in Excel 2007 or did I miss something??
I know that the selected default printer or the chosen zoom factor may
have an influence on the shown size of a shape, but these discrepancies
are ...appointment prints different time
My client uses a french CRM with date format dd/mm/yyyy. when he creates an
appointment with the SFO client from e.g. 11 o'clock until 16 o'clock it is
saved like correctly. but when he prints it out, the starttime is 8 o'clock
and end time 13 o'clock.
it is like that for every appointment. it always prints out 3 hours earlier.
Anybody had this too?
You can check if both the server and the user are in the same time zone.
Open Control Panel, Date and Time, Timezone
On the laptop open Control Panel, Date and Time, Timezone
Open CRM vi...Different Columns on different pages
Hi - think this will be easily resolved but I am stuck!
In publisher 2000 how do you create a multipaged, two page
spread that has different columns on some pages.
I keep bringing myself back to "ignore background" and
trying to use "arrange" - "layout Guides" - but this isnt
Am I thinking too deep? Is the whole point that the
layout guides are simply guides and stay the same thorugh
the whole document regardless.... you just use ruler
guides to make the changes through the different pages?
What is the difference between CRM standard and professional?
> What is the difference between CRM standard and professional?
Does it have anything to do with Outlook integration?
I am Johnny!
Your Internet penpal.
I have a scooter, how about you?
"Johnny" <email@example.com> wrote in message
> Johnny wrote:
> > What is the difference between CRM standard and professional?
> > -Johnny
> Does it have anything to do with Outlook inte...NIC Teaming in SBS 2008
Does SBS 2008 standard (or premium) support NIC teaming? Yes or No! I intend
to install SBS 2008, create the team and then run the ICW. If this is going
to work then great. I know it doesn twork on SBS2003 as it complains there
are too many NICs.
SBS 2008 does not support multiple NICs. That's the simple statement. Not as
teaming, not as routing, not as an Internet firewall server. The SBS 2008
Setup generally has trouble with multiple NICs or teaming, and the network
related wizards fail on teaming NICs.
MS recommends not using NIC teaming on an SBS...divs are different in different browsers
I just ran accross something strange.
I tried to used "Div Tags" instead of tables.
So it looks something liket his:
It looks great in Internet Explorer,
but firefox and chrome destroy it.
Can anyone let me know on what to look for within the css or layout of the
divs to make it work proper.
Or in this case...is it just best to go back to tables within 1 div tag.
...Compare and Merge Two different CRM Instances
We have two different CRM environments that we want to merge into
one. My first step was to try and compare the different instances to
see what the different were between them.
I exported all of the customizations from each and performed a diff.
Yuck. Since the customizations don't export the elements in the same
order it looks like their are over 7,000 differences between the two
files. Reality says that at best there may be 50-100.
Is there any way to get these to output in the same order so that I
can get a more realistic diff between them? The only other thought I
have at this po...searching different files macro
I need to search for a certain asset number in the asset column in man
different excel files. If the asset number does exist it should copy
paste the whole row into a new sheet and build on that sheet . all th
excel files have the same columns but different data.
i am looking for a macro or any other way to automate this
Message posted from http://www.ExcelForum.com
P.S.: please don't multipost
> I need to search for a certain asset number in the asset column in
> many different excel files. If ...OWA on a Different Server
I have an Exchange 5.5 Server and a separate Web server that hosts the
Exchange OWA. I recall there was a setting that had to direct it to your
Could someone please point me in the right direction?
I think it's a file that is created during setup but since we moved servers
it is still pointing to the old server. I need to know what file to edit to
point to the new server.
BTW:Please ignore my post in exchange2000.admin. I clicked too quick.
"Chris Cairns" <firstname.lastname@example.org> wrote:
>I have an Exchange 5.5 Server and a separate Web se...Hide/Show different instance of CDialogBar
I am quite new to MFC, I need help in this topic.
I create in my FrameWnd, in the OnCreate multiple CDialogBar which
represent the same status bar but naturally with different content,
with this code (m_wndStatusBar is the array of my class that derives
for(int i=0; i<nTotalCodAbi;i++)
if (!m_wndStatusBar[i].Create( this, IDD_STATUS_BAR, CBRS_BOTTOM,
return -1; // fail to create
//only ...Workbook with different queries on each worksheet
I have several workbooks to which I copy the current spreadsheet to create a
new one. Then I edit the query to the database (only on the new worksheet)
to reflect a different time period. In 2003 it was a breeze, I just editted
the query , saved it and returned the data to the worksheet. Piece of cake.
In 2007, the onnly way I have found to do this is to open the properties of
the connection, change tabs and select edit query , make changes and return
data and OK my way out of the all the pop-ups. IS there an easier way to do
this? Why are the external connection options grayed out? Sh...7 Interface Engineer Team Lead/Sr Healthcare
Please find the Job description mentioned below and if you have any
consultant interested, please send me their updated resume with
Mode of interview will be telephonic
Position: Team Lead/Sr HL7 Interface Engineer, Nashville, TN
Location: Nashville, TN
Works independently to assist management in coordinating and or
overseeing HL7 Interface Engineers and analysts in the development,
implementation, training and maintenance activities for HL7
interfacing initiatives. Devises or modifies systems and procedures to
solve complex problems and produce spec...Rounding Difference on Historical ATB
On some Multi Currency Sales transactions when sales discounts are taken
there is a rounding difference of .01 . The CURTRXAM for these invoices = 0
in the originating currency but can be .01 or -.01 in the functional currency
This invoice and the payment will show on the Multi Currency Historical ATB
forever even though the originating amount owing is 0 because the functional
amount is + or - .01 ?
This .01 does not show if you run the ATB with Options but only on the
Does anyone know a SQL script or some way of removing or changing these
items so that they do no...Automating Different Survey Results
Does anyone have any idea on how to facilitate the preparation of surve
Our survey results are downloaded from our survey online facility (som
facility when it can't even produce the report :sigh:). These survey
are about the services of the different support groups of our company
So each survey has its own set of questions. The backend process o
translating these results is quite tedious and I've been thinking o
how to automate it ... I know that there is a better way. I am usin
Excel but only the standard features such as countif, sumproduct
pivot, charts. But still it c...I did it too- something different
For the first time in almost a decade, I have put together a website.
It's a work in progress and I am trying to keep it simple - no Flash,
animated graphics, ornate backgrounds. It's all about stuff happening in
my realm, something like a one-stop site for people in my circulation
area. The address is www.mcvcourier.com
If you have any comments, please let me know.
(I know, Off-topic!)
Hey, Mike, looks pretty good to me... Did you use Publisher?
I had forgotten you were in Cincinnati. You will have to look up my son if you ever
get to UC. He is an adjunct professor and ...