Crystal Reports 9 hang up
While creating a report in Crystal Reports 9.2.2 using the Crystal Reports
Wizard, Crystal just seems to hang indefinitely after clicking "finish".
I'm not even sure where to start to give you guys the information necessary
to troubleshoot this. I've looked at so many aspects and potential solutions
to no avail that I have now lost complete track.
When I do a Send/Receive in Outlook, I get the error "Task 'Microsoft
Exchange Server' reported error (0x8004010F) : 'The operation failed. An
object could not be found'"
Do you know the cause of this error? It is preventing me from doing a
full synchronize for my offline folders.
I am running both Exchange 5.5 and 2000 in Mixed Mode at the moment. My
mailbox is on the new 2000 server.
Check to make sure that user is showing up in the GAL. If not, that's your
problem. Unhide it from the GAL.
Please do not send e-mail directly to this a...Resource Addition to Enterprise Resource Pool
Project Server Ver: 2003
Recently our admin added a resource from Companys Active directory to
the Ent Resr pool of MSP
However due to some reason, though it got added in the MSP_RESOURCES
table, it did not get added to the MSP_WEB_RESOURCES table.
1) When we again try to add to the Ent resrc pool, it prompts
duplicate resrc name
2) But when we try to find in the resrc list , the name does not
3) Also it is not seen in PWA admin screen
During the resrc addition step , the transaction did not complete and
failed to add to the MSP_WEB table.
how can we ,...change CRM browser address?
Can I change the address to login to my CRM server? i.e
Exchange is (domain name/Exchange) I want CRM to be
...Crystal Reports 10
I am in the final stages of evaluating RMS for purchase. We would like to be
able to generate custom reports, so I have been testing building them in
Crystal Reports 10. I have no issue running the reports within Crystal,
however when I try to open them in RMS from the utilities menu, the first
screen - Crystal Reports File is blank, and when I push generate, I get the
error: "Run-time error '429': ActiveX component can't create object."
Does RMS only work with Crystal Reports 9? Does it even work with 9? Am I
missing something? Any advice would be appreciated...Office 2003 fatal errors after May 10 Updates.
After the updates were installed my entire office suite shut me out. I cannot
access anything at all and I need it badly. I tried a system restore without
results and I am unable to repair or reinstall Office. Can anyone help me
This usually will happen if your version of Office is not a legal licensed version
or it is a Trial version that has expired. From where did you get this version of
Also post the error that is generated when this happens
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not ...MS CRM 3.0 user's guide #2
i am using MS CRM 3.0 & i want to prepare a documentation of using it. i
can't find it's user's guide. plz tell me how can i document it and if there
is a prepared document,how can i use it?
click on this link and then browse on"Help and how-to articles".
Blog = http://mscrmsupport.wordpress.com/
Additionally, here is a link to the Microsoft Dynamics CRM 3.0 Implementation
Guide. This guide addresses the planning, installation, and operative tasks
for the maintainance of ...Event Viewer Errors in Windows 7 64bit
I just recently finished building my own gaming rig and I keep noticing the
event in Event Viewer/Custom Views/Administrative Events and see a litany of
this same error under Kernel event tracing.:
SessionName Circular Kernel Context Logger
"Session "Circular Kernel Context Logger" failed to start with the following
I have searched the net and found no resolution. I don't think this is
serious, but but I would like to resolve this if possible if anyone here can
give some help.
Thank...Create User isn CRM 3.0
I am trying to create a new user in the CRM, but I get a messege
stating that the http://crm/mscrmservices is not responding. I beleive
I have all the right privliges. I attemtp to go to the website for
mscrmservices and I can not login there, even using the domain login
that runs the CRM services. I am using SQL 2000 with CRM 3.0
Thanks for the help
...subtotaling worksheets #2
very vague, I'm afraid ... any ideas
GazMo's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1461
View this thread: http://www.excelforum.com/showthread.php?threadid=27025
I'm not sure whether I am intrepreting what you want correctly. I thin
you want to create subtotals on each page and then copy the subtotals a
the bottom of the page.
For each worksheet you could:
1. create the subtotals - use absolute cell references, specify Jan-De
2. loop through the rows to f...Auto Correct #2
I am trying to type the last name "True" and Excel keeps
changing the word to "TRUE" in all caps and centers the
word in the cell. How do I stop this from occuring?
Either format the cell as text first, or type an apostrophe ' first. This
tells Excel it is text and the ' will not appear in the cell.
<email@example.com> wrote in message
> I am trying to type the last name "True" and Excel keeps
> changing the word to "TRUE" in all caps and centers ...Specified driver could not be loaded due to system error 1114 -Ora
I have a problem of running the ASP.NET web pages on the server after making
the file deployment. The server was intalled OraClient11g_home1. I created
DSN in ODBC with this driver. The test connection was successful. When I ran
the page that has the connection with Oracle, I've got this error message :
"ERROR [IM003] Specified driver could not be loaded due to system error 1114
(Oracle in OraClient11g_home1)"
Could you help me to solve this problem?
Thanks in advance.
=?Utf-8?B?YmllbndlbGw=?= <firstname.lastname@example.org> wrote in
news:44...Can I operate several different email addresses from 1 client?
We have separate user accounts set up on our XP platform.
My partner prefers to use Outlook Express. I use Outlook.
I use ONE email account i.e. with one email address, on Outlook.
My partner uses TWO different email addresses, same domain. One for
business, one for personal emails.
HOW do I set things up so that she can log on to Windows and have her
business and private emails either arriving in separate folders, OR business
on Outlook, and private email on Express - she'd prefer separate folders.
How do you do this, because I am finding that email sent to either of her
addresses...CRM 4.0 Mobile
Any idea when they will release CRM 4.0 Mobile? We have just recently
upgraded from 3.0 and would like to be able to use Mobile with 4.0.
The Timing of the release is "very soon" according to Microsoft.
We are waiting too.
MBSS, MCNPS, MCTS
> Any idea when they will release CRM 4.0 Mobile? We have just recently
> upgraded from 3.0 and would like to be able to use Mobile with 4.0.
...Sending Error Message
When I press the Send/Receive button, it appears that Outlook 2003 is trying to send 3 or 4 files even though there are no files to be sent. I then get the following error message which quickly disappears: Task 'pop.xxxxxxx.com.au' - Sending reported error (0x80040201): 'Unknown Error 0x80040201'. Outlook seems to work OK otherwise. I do not have Outlook Express installed. I have vet, zonealarm, adaware, spybot etc and can't find any viruses, trojans etc.
...can't send/receive #2
Help! I have Comcast and am trying to switch from Outlook Express to
Outlook. I set the parameters according to Comcast directives. When I send
the message hangs in the Outbox. When I click on Send/Receive" I get
"Operation Failed". Any suggestions??
On Wed, 22 Dec 2004 00:36:34 -0500, Joe & Eileen wrote:
> Help! I have Comcast and am trying to switch from Outlook Express to
> Outlook. I set the parameters according to Comcast directives. When I send
> the message hangs in the Outbox. When I click on Send/Receive" I get
> "Operation Fa...instrumentation in enterprise ibrary.
can anyne tell me what instrumentation means? how to check if
instrumentation is enabled or disabled?
And how to disable instrumentation if it is enabled. when i deploy my
application, i only givees dlls of caching and configuration. my
client is getting lots of error in application event log whose source
is enterprise librrary instrumentation'
previously on clients system these dlls' were working properly
suddenly after deploying new build this problem occured.
can anyone tell why this is happening and solution for this other
thanks ...Summarry data to 1 worksheet
I have one workbook for each month. For e.g January 04.xls
This workbook individually contains sheets for each day of the month.
In all the individual sheets data starts from cell b5 and the last
column used is Q.Row B4 to Q4 contains headings. This is constant for
all individual sheets.
The no of rows vary from day to day.
The individual worksheets are named 010104,020104,030104 and so on
I want to sum only 2 columns in these woksheets and summarize them on
1 sheet in the same workbook say a worksheet named total in the
Date epr(total) Pval(to...Upgrade to enterprise edition
Is it easy to upgrade exchange 2000 standard single server, to a 2000
enterprise? Should I just put the CD in and follow the instruction or that
would be more complecate?
Are there any things i should consider before doing that?
Thanks in advance for any suggestion-rob
On Thu, 16 Dec 2004 15:36:34 -0500, "Rob" <email@example.com> wrote:
>Is it easy to upgrade exchange 2000 standard single server, to a 2000
>enterprise? Should I just put the CD in and follow the instruction or that
>would be more complecate?
>Are there any things i should consider before doing that...CRM 3.0 and action pack
CRM 1.2 was part of Action Pack. Does anyone know if 3.0 will be also? If not
will it be free to Certified Parters...Small Business Specialists?
Yes, plans are for it to be in Action ack and to also be available to
MVP - Microsoft CRM
"Mark Bowles" <MarkBowles@discussions.microsoft.com> wrote in message
CRM 1.2 was part of Action Pack. Does anyone know if 3.0 will be also? If
will it be free to Certified Parters...Small Business Specialists?
I got my Certified Partner MSDN...Adobe Acrobat #2
I just installed Adobe Acrobat 7.0 standard on my computer. Now when I open
my Publisher files (2003 version) the pictures do not show on my screen.
They print they just don't show. Once I uninstall Adobe Reader everything
was fine again. Any suggestions?
Try updating your video driver.
With Adobe installed, slide the acceleration down on your adapter, control panel,
display folder, settings tab, advanced button, troubleshoot tab. If this solves your
issue then your graphics card driver needs upgrading. Go to the manufacturer's web
page and look around.
Mary Sauer MSFT ...Crystal: Verify you have enough crystal licences
I have been experiencing a problem, like many of you, with Crystal
reports on a CRM 1.2 server reporting that there are not enough
licences when I try to access a report. The reporting service works
for a while and then stops - restarting all of the crystal services
make no difference but after rebooting the server it starts to work
There are a number of events in the event viewer i.e.:
MSCRM Platform Error Report:
Error: Unabl...Email #2
I sent an email message using publisher as an html and it
previewed great in my tests in Outlook, but some of my end
users received skewed messages with the text in code. Are
Email docs only supported through Outlook? I ran a test
through my personal account in AOL and got the same messed
Has anyone successfully transmitted emails created in
I AM GREATLY FRUSTRATED THAT I JUST SPENT DAYS CREATING A
REGISTRATION FOR THAT I EMAIL TO TONS OF POTENTIAL CLIENTS
AND THEY COULD NOT EVEN OPEN THE DOCUMENT...IF YOU FIND
THE ANSWER TO THIS PROBLEM, PLEASE LET ME KNO..."update ta set ta.ra=1 from tablename ta" how can pass in Access
is it can be pass in the Access?
how to change?
set col = t.col
from ta,(select id,max(col) col from tb
group by id) t
where ta.id = t.id
UPDATE ta SET col = DMAX("col" , "tb", "id=" & id )
UPDATE ta INNER JOIN tb ON ta.id=tb.id
SET ta.col = tb.col
WHERE tb.col = ( SELECT MAX(col) FROM tb AS c WHERE c.id = ta.id )
A Jet query implying an aggregate (elsewhere than in a sub-query in the
WHERE clause) is NOT upd...Resource / Project level enterprise fields as dimensions in msp_project_timesheet
When I try to use Resource or Project level enterprise fields as
dimensions in msp_project_timesheet, my actual billable hours always
goes to zero. The actual billable hours reports correctly when I use
the dimensions inherent to the timesheet.
Is there a solution to this besides building my own virtual cube or
writing a custom report against the reporting database? These were
the two options I found in old posts.
Was this problem fixed in a service pack that I missed?
Thanks for your help.