New client install for Dynamics 9.0 ... OLE, ODBC and Modified RepFirst ... you need to change the discussion group from MBS GP to Dynamics GP
to be consistent with the new version.
Second. The new client installs working with MSI is great. However, a few
basic and required settings constitute too much work. First is OLENotes. To
get the required functionality of attaching files to notes, there must be a
OLENotes path statement to a MAPPED drive in dex.ini. Please incorporate
this setting into the msi file.
Also ... ODBC has to be setup. Please configure a way to work this in with
the msi.
Finally ... when a client runs the msi, it asks the pe...
Upgrading callouts and assemblies from 3.0 to 4.0I have existing callouts and assemblies in 1.1 doct net versions.
What would be the steps to upgrade these callouts and assemblies to 3.0?
I have made calls to CRM and Metadata webservices from the assemblies. How
much and what changes are required to these assemblies for making them
useable in MS CRM 4.0?
Please give me some ideas..
--
romeo!!
For a complete conversion there are a few steps, depending on how you use the
webservices this may take some work.
1. Create the new plug-in assembly classes: these classes must implement the
IPlugin interface. In the Execute method you must ma...
Creating CRM Contact ErrorHi All
I'm trying to create a contact record in MS CRM but I keep getting the
same error message back from the CRMContact.srf webservice even though
I'm providing all the correct detials.
I'm using C# and the code is as follows:
CUserAuth oUserAuth = oBizUser.WhoAmI();
strContactXML = "<contact><salutation>Mr</salutation><firstname>Fred</firstname><lastname>Quimby</lastname><telephone1>1111
791072</telephone1><telephone2>11111
822254</telephone2><telephone3></telephone3><fax>01705
823999<...
eConnect Error #3I am developing an integration using a tool that sits on top of eConnect.
When I try to run the routine I get an error that says "Invalid object name
'DYNAMICS..TA00950'". I do not see this object in the DYNAMICS database and
cannot find any information on it anywhere. Does anyone know how it gets
created? I have re-installed eConnect 8.0 and still it did not get created.
VGrinam
...
how to set up e-mail auto replay in MS CRM ?
Ed
CRM will not autoreply for you...however the mail will go into your outlook
as well so perhaps use that to autoreply.
There is nothing in the workflow to provide a facility to auto reply to
emails.
"ed" <anonymous@discussions.microsoft.com> wrote in message
news:0ea301c3b425$5a8856a0$a401280a@phx.gbl...
>
Auto-response e-mail: Generate auto-response e-mail to
customer requests.
Document Overview on MBS site!!!
>-----Original Message-----
>Ed
>
>CRM will not autoreply for you...however the mail will go
into your outlook
>as well so perhaps use th...
open args 3 fields and strCriteriaAccess 2003
I have a form called fPMAddEdit(PK PMID and fields PMLName, PMFName, Title.
This form is to enter new Project Managers.
There is a second form called fEmailAddEdit(fields RecipientLastName,
RecipientFirstName and RecipientTitle. This form is to enter email addresses.
Most Project Managers will have an email associated.
However there may be other email addresses for people that are not in the
fPMAddEdit form.
In the form fPMAddEdit I have a btnEmail that opens the fEmailAddEdit form.
If there is a record associated with PMID in fEmailAddEdit then display
data. - P...
IIS/DNS Requirements for CRM 3.0 SBE?I read my previous posting and throught rewording might make it easier to
understand my question.
The SBS 2003 server I am installing CRM onto has 3 IP addresses bound to it.
192.168.200.1-3
I am trying to install CRM using the .3 address and applying a specific host
URL to it. For instance the .1 address is server.domain.local, the .2
address is app.domain.local, and I would like to use .3 as crm.domain.local.
<A Records> for each host have been entered in DNS.
The configuration wizard that appears after the initial install defaults to
http://192.168.1.3:80 on the final screen ...
Bug found in Outlook 2007There is a BUG in Outlook 2007 build 12.0.4518.1014.
I have TWO profiles, and very often when I start with the non-Default one,
and then close it and restart Outlook 2007, I no longer have a choice to
select which profile to start it with. The only way to fix that is to go
Task Manager, and manually kill OUTLOOK.EXE and then restart it. Then, it
works fine.
They need to FIX this annoying problem. I tried finding where I can submit
a bug report, but could not find anything of sorts on their website.
P.S. I am running Vista Ultimate together with this setup.
Michael Wexin, you ...
insufficient rights to execute users manager in CRM 3.0Hi everyone,
When one adds users from the http interface, one can only add one at a time;
on top of that, one cannot choose the name from a list but has to type the
whole "domain_name\user_name" identifier.
In deployment manager/users manager on the contrary, you are supposed to be
able to create new users for Microsoft CRM by choosing then from a list
provided by the domain's Active Directory; moreover, you can add as many
users as you wish on one single shot if you select them with CTRL+clic.
The only trouble is that once the whole list of users has been duly selected
and...
XMLSerializer #3I'm using XMLSerializer to serialize hierarchical Class-based objects and
their content to XML. There are a number of fields (i.e. properties) that
are optional, meaning that if no data id written to that property of the
object, then no entry is to appear in the XML, as the destination system
already knows the default values for those fields.
The issue I'm having is that although this is easy to do with String
properties by setting them equal to nothing in the definition, this method
doesn't work for other property types, such as Integer and Boolean. If I
set Integer and Boolean...
Exchange 2003 / IIS 6.0 WMI Install problemSome, about half of our fresh installed Windows
2003/Exchange 2003 servers are missing WMI performance
classes for monitoring. The only class we know of that
does not appear to be installed is:
Win32_PerfRawData_SMTPSVC_SMTPServer
Contains many sub functions and events that can be
monitored.
Is there a way to copy the WMI class from one machine
that has them to another? We have tried reinstalling
SMTP and Exchange 2003, but may have failed because the
WMI service kept starting up on its own during the
reinstall process, are there any other services or
applications we can uninsta...
Drop Down List #3
I use drop down lists with many bits of information. When I open the
lists after they have been used, the list does not go back to the first
enty in the list.
What do I need to do to make the list default to the first enty?
--
travelersway
------------------------------------------------------------------------
travelersway's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=17623
View this thread: http://www.excelforum.com/showthread.php?threadid=476762
you can select the cell and press delete,or right click and choose
clear contents, this will reset it
Th...
Global Address List not updating #3Hi,
We have SBS 2003, and last week I added various Distribution Groups. I
added them in the Active Directory and Users tool and they appear there and
under Distribution Groups in the Server Managment.
However in Outlook, non of these distribution groups appear in the Global
Address List.
Anyone have an idea what could be wrong or how to force the Global Address
List to see the changes?
Thanks!
What clients are you using? Have you tried a rebuild in ESM?
Nue
"Lee" <noreply@infinityconcepts.net> wrote in message
news:uOC0kHMXGHA.752@TK2MSFTNGP02.phx.gbl...
> Hi...
#DIV/0! error #2i created a formula in a cell b4 as follows: =(c4/c2)
there is nothing in c2 yet becasue it is for data for the
month of august, so in b4 I get the #### error, and all i
want it to say is 0% until new data is entered in c2
it looks sloppy this way, can anyone help?
can i change the formula to say it's okay to divide by
zero and get zero as the result?
thank you for any help!!!!
Hi Jesse!
One way:
=IF(ISBLANK(C2),0,C4/C2)
--
Regards
Norman Harker MVP (Excel)
Sydney, Australia
njharker@optusnet.com.au
Hi
Try this:
=IF(C2=0,0,C4/C2)
--
Andy.
"Jesse" <bluejeansbo...
3.0 and cross domain trustAnyone know... does 3.0 support cross domain trusts? I know the old version
did not... thanks.
Yes it does - read the implementation guide
==============================
John O'Donnell
Microsoft CRM MVP
http://www.crowechizek.com/microsoft
"AW" <AW@discussions.microsoft.com> wrote in message
news:1A9DC069-8E5D-4B6F-A19E-C3919755FCF8@microsoft.com...
> Anyone know... does 3.0 support cross domain trusts? I know the old
> version
> did not... thanks.
...
Greatplains8.0 adding the customized froms in menu or toobarDear Friends,
Can anyone show me how to add the customized forms in
menu or toolbar of GP 8.0.
Detail: I have created some customized forms in
Decterity8.0 and after the itegration and packaging
process I am unable to add me customize work in GP8.0,
whereas in GP7.5 I can add through SETUP>COMPANY>PALATTE.
Thanks in advance
The Great Plains Integration guide explains this all very well with code
samples in the chapter on navigation. I'd take a look at that. To see a
working example, the sample application installed with dexterity,
develop.cnk, also has menu & toolbar i...
One Exchange server wont send mail to certain domainsHi,
Just wondering if I can pick someones brains.
We have 2 Exchange servers, 1 2000 (Ex2000 Sp3, Win2k SP4, Global Catalogue,
member), and 1 2003 server (Ex2003 Sp2, Win2k3 SP2, master).
Since putting in the 2003 server, users on the 2000 server get some "mail
server rejected connection" failures when sending to 1 or 2 domains, most
other domains accept mail ok. Users on the 2003 box can send fine. We've
checked our MX records which are in place on the firewall, and we can also
telnet to these domains and complete the telnet test.
2003 > outside world (u...
SMTP #8I am looking for information about how to forward mail from an exchange 2000
mailbox to an Internet account via SMTP. If someone would let me know I
would appreciate it.
Billy
Create a mail-enabled contact that has the external e-mail address assigned
to it. Next go to the properties of the user account you want to forward,
Exchange General tab, Delivery Options, and pick the contact as the
forwarding address. Optionally specify to deliver to both the mailbox and
contact.
--
Ben Winzenz
Exchange MVP
"billy" <,mnmn@,mn,m.net> wrote in message
news:SPuMd.24539$t67....
Email subject CRM 10020014Howdy!
When sending an email from Outlook a tag is added to the subject line, for
example: My Email Subject CRM 10020014. Can I change the space between the
subject and the CRM tag? Its too close and is confusing some of my
customers.
Thanks!
David Lozzi
Look in Settings/Org Settings/Auto Numbering. You might be able to add
leading spaces - haven't tried it though.
Ian
"David Lozzi" <dlozzi@nospam.nospam> wrote in message
news:uSxea9AWGHA.2760@TK2MSFTNGP11.phx.gbl...
> Howdy!
>
> When sending an email from Outlook a tag is added to the subject line, ...
Post cards #3 I have typed a thank you card using Publisher 2003. The postcard template
prints 4 cards to a page. I would like to use a different name on each card.
Please tell me how to set up 4 different names using the blank
publication.Thanks.
Loretta
Mail merge?
Create a mail merge
http://office.microsoft.com/en-us/publisher/HP052584251033.aspx?pid=CH010504371033
--
Mary Sauer MSFT MVP
http://office.microsoft.com/
http://msauer.mvps.org/
news://msnews.microsoft.com
http://officebeta.iponet.net/en-us/publisher/FX100649111033.aspx
"Publisher General Questions" <Publisher General
Q...
Recipient VerificationHi,
I would like to enable SMTP time sender verification on Exchange 2003. I
would like this to happen at SMTP time. Domino had this functionality, as
seen below:
implode:~ $ telnet dominosrv.domain.com 25
Trying 11.11.11.11...
Connected to dominosrv.domain.com .
Escape character is '^]'.
220 dominosrv.domain.com ready at Fri, 24 Mar 2006 18:20:31 +0000
HELO test.com
250 dominosrv.domain.com Hello test.com ([22.22.22.22]), pleased to meet you
MAIL FROM: <>
250 ... Sender OK
RCPT TO: <nouser@domain.com>
550 nouser@domain.com... No such user
QUIT
221 dominosrv.domain.co...
html mail in crm 3.0 workflow managerIn CRM 1.2 it possible to create nice mail templates with html code simple
in frontpage with the usage of field values. Does anybody have a idea how to
build html mail templates with flied values, so that i can copy the html in
the workflow "create mail" like in crm 1.2??? when i use the same field
values like in the workflow manager in my html code, the field ist not
displayed in the html mail.
Give this a try.
</pre>
Your html code ....
<pre>
...
RMS 1.0I am intereseted in hearing from those using RMS Version 1.0 and their
expereince with PCI compliance. I note that Version 2.0 is listed as a
validated PCI application and that Version 1.0 is not
(http://usa.visa.com/download/merchants/validated_payment_applications.pdf).
Specifically, I would like to know if anyone is using Version 1.0 and has
successfully configured the application to be fully compliant with PCI.
Alternatively, has anyone concluded that it is impossible to make Version
1.0 PCI compliant (e.g., lack of encryption, inadequate auditing/logging)?
Finally, I would be int...
Girard Perragaux Classic Elegance 18kt White Gold Black Leather Mens Watch 49530.0.53.4124 Recommendation Discount WatchesGirard Perragaux Classic Elegance 18kt White Gold Black Leather Mens
Watch 49530.0.53.4124 Recommendation Discount Watches
Girard Perragaux Classic Elegance 18kt White Gold Black Leather Mens
Watch 49530.0.53.4124 Site: http://girard-perregaux-watches.pxhelp.com/Girard-Perregaux-wristwatch-2874.html
Thank you for choosing http://www.pxhelp.com/
Quality Girard Perregaux Watches: http://girard-perregaux-watches.pxhelp.com/
Girard Perragaux Classic Elegance 18kt White Gold Black Leather Mens
Watch 49530.0.53.4124 AdditionalInfo :
Watches Brand : Girard Perregaux Watches ( http://girard-p...
Allow or Deny when a Program tries to send an emailI am trying to send a message through Outlook with a vb.net program. I
receive a message saying that I can allow or deny this message.
After a few of these messages, I started getting a different message that
gave me a choice to ALWAYS allow messages to be sent from this program.
I don't know what triggered the appearance of this send message.
My problem is that I need to install my application on my user machines,
does anyone know how to disable this allow or deny message OR trigger the
send message which allows me select always allow?
Thanks,
What version of Out...