can excel check one column against another
Hi. I have a spreadsheet with columns such as A, B, C, D, filled with
numbers. Each row across such as row 1, then row 2, then row 3, etc of
numbers is totaled in column E. Countless rows, each of which is
totaled per row and then ends with a grand total at bottom of column E.
Next comes columns F, G, H, also filled with numbers (but different
numbers), which is totaled per row in Column I. At the bottom of Column
I is a grand total. Even though arrived at using different sets of
numbers, -both grand totals - in columns E and I must match.
Sometimes they don't match. Ouch.
So here is m...formula that meets two criteria and sums?
I need a formula that will determine if information in a database meets two
criteria and then total the number of rows that are correct. The column
titles are Event type and New/Repeat. I need to be able to distinguish if an
event is sports, smerf, or group and then new or repeat. Any help would be
Array-entered (CTRL-SHIFT-ENTER, or CMD-RETURN):
In article <3FD727FE-C380-4924-A366-388967B15BA7@microsoft.com>,
"...why crash in the second method of one interface
Using one class generated from *.tlb to call 2 methods of one COM. The
strange thing is that I got one error of the "First-chance exception in :
0xC0000005: Access Violation" in the second method. I also use ASP web page
to call both methods of this COM and both methods seems is OK.
IDE_Error::Report (ComError|1,"ComObj.TemplateManage in
result = mytemplate.Check (templatefilename);
decodeparameter=mytemplate.GetInfo (templ...Duplicate Transactions, One When Pending, One When Posted
I'm sure this has been addressed, but I couldn't seem to find an
My problem is, a transaction occurs at my bank, and MM2K7 downloads
the data for it. Once that transaction moves from "Pending" to
"Posted" at my bank, the transaction data changes, so MM downloads it
again. Sometimes I get a possible duplicate message from MM,
sometimes I don't.
What are people doing to handle this situation?
This is a problem with your bank, not with Money. Eventually they should
fix it. Call them. In the meantime VOID the pending transacti...MSR Credit Card Reader adds all the information on one line
Is there a way to get the CC reader to properly seperate the the acct # from
the expiration date? When I swipe I currently get everything on the acct #
Thanks in advance!
What type of CC reader(MSR) to you have?
Typically this is an issue with simply configuring the MSR.
> Is there a way to get the CC reader to properly seperate the the acct # from
> the expiration date? When I swipe I currently get everything on the acct #
> Thanks in advance!
Its a IDTECH Minimag USB/Keyboard Interface
Do I need to select the Wedge Key...grid off on one page
Is it possible to turn the grid off of only one page?
On Thu, 14 Feb 2008 10:37:11 -0600, "greg" <firstname.lastname@example.org> wrote:
>Is it possible to turn the grid off of only one page?
Not really as it is a document wide setting....
however, there is workaround
open the page shapesheet
menu window -> Show shapesheet
and set XGridSpacing and YGridSpacing to a large value.
Regards, Paul Herber, Sandrila Ltd.
SSADM for Visio http://www.saadm.sandrila.co.uk/
On Thu, 14 Feb 2008 16:47:53 +0000, Paul Herber
<SubstituteMyFirstNameHere@pherber.com> wro...Next Date given one date
At this time, I cannot use VBA. Here is my objective:
For a given treasury note security:
Cell A1, Date 6/17/2004 - today's date
Cell A2, Date 7/15/1997 - first coupon date
I want to identify the "previous coupon date" and "next
coupon date" from today's date based on the frequency of
the "first coupon date".
* Security pays 2 times each year
* Based on first coupon date, pay dates are: 1/15 & 7/15
* Given today is 6/17/04, the next pay date is 7/15/04.
* Given today is 6/17/04, the previous pay date is 1/15/04.
Can this be...One to One relationship
I have an Events entity that is an offshoot from the Contacts entity.
Basically, it tracks what events each contact has been invited to, and
is used mainly by the Events Coordinator. I've set it up as a One
(Contact) to Many (Events) relationship. However, I really only want
one event form for each contact form. The reason I've set up a
different entity rather than just adding a tab is that access to this
entity needs to be tightly controlled.
Obviously, if many events forms are created for the one contact, it
would be very difficult to tell which one is accurate etc. Is it
possibl...Copy range C5:Lastrow and paste to two different worksheets
I cannot seem to find a solution to this, and hope someone might be able to
I have three worksheets: Ratios, Trades, Trades2
I am trying to find a vba method to select the Range C5:(the last row used
in columnC) on the Ratios sheet, and copy and paste this range to Cells
F11->down on the Trades and Trades2 Sheets.
Please could someone provide a suggestion for this. I really do appreciate
Darn it, always pleasing when I manage to solve my own problem - but always
concerned I may have wasted someones time by posti...route inbound email from ip to one folder
Is there a way to route any incoming email from a certain
IP address to a single folder? Our company is receiving
emails from a source that we do not wish to receive, and
would like these email to be directed to a singe folder
rather than blocking them.
you could send them to the turf dir...
"daine" <email@example.com> wrote in message
> Is there a way to route any incoming email from a certain
> IP address to a single ...To view, specifically Units in one report
I have report with a Reporting Tree (9 Unit), when the report is generated, I
select only two unit, but I need that the drill down show one report with
these unit only
If you want multiple units in a single report you will need to use the column
layout with unit restrictions on multiple columns
> I have report with a Reporting Tree (9 Unit), when the report is generated, I
> select only two unit, but I need that the drill down show one report with
> these unit only
Each Column layout have the unit restrictions
"Lesl...One client (Server 2k8-R2/HyperV) will not sync with DPM
We have been running DPM successfully for about a year now without any major
problems. Recently we added a new server - a fairly robust PowerEdge that
will be housing 4 HyperV VMs.
For whatever reason, I can't get anything but the HyperV "Initial Store" to
sync correctly. I thought initially it might be a problem with the HyperV
machines, but it also fails to back up a small directory of files on the host
The oddest part about this is I really don't get an error. It will try an
initial sync and run for a day or two and show very minimal data tr...See more than one tab at a time
I would like to be able to see more than one Tab at a time in Excel.
Currently I'm able to see two Tabs from different worksheets, but not two or
more tabs from the same worksheet
On Sat, 28 Aug 2004 14:57:03 -0700, "rocky59"
>I would like to be able to see more than one Tab at a time in Excel.
>Currently I'm able to see two Tabs from different worksheets, but not two or
>more tabs from the same worksheet
That would be because each tab represents a single worksheet. Clicking
on the tab would move you from where ...Exchange 5.5 - One Organization
I am having a problem that I would like some more information on. I have
One Organization (5.5) and 16 Sites (5.5) and would like to know why I can't
stop the other sites from sending mail through me. If I can, I would like to
Thanks for any help.
what do you mean by "sending mail through me"? What mail? Internet email?
Does each site have its own Internet Mail Service? Or is your site kind of
the "hub" where all Internet email comes in and goes out?
Susan Conkey [MVP]
"dave.mudgett" <firstname.lastname@example.org....update two fields at once
Hi Access Gurus,
In A2003 I want to write an update query which updates about ten fields at
once. The idea is that if any one of these fields is null, I update it with
a value read from a linked Excel table.
For the sake of simplicity, let's say I have only 2 fields, F1 and F2.
Either one of them might have a null value. The logic is: IF F1 is null,
update it, and IF F2 is null, update it, but if the field already has a
value (is non-null), let it alone. Can I do this in one update query, or do
I have to write a separate query for each field I am updating? In the quer...Why Would You Lose Sound On One User
Service Pack 3 with all current updates
Pentium(R) D CPU 2.80Ghz 2.79Ghz, 512 MB RAM
System has three users all with admin rights - User 1(primary - me), User 2
(wife), and System Admin. (which I made visible on desktop).
I (User 1) have lost sound when attempting to play CD's, and other audio
files using WMP 11, however, I can still hear system sounds. User 2 and
System Admin. still have full sound.
System restore does not help ( in this case I only had a restore point from
5 days ago.
"Old age and ...Tracing and tracking email on one mailbox
1. I want to use a current copy of the Exchange 2003 database and scrub it
for all emails regarding one mailbox. Is there a tool that will assist me in
2. How do I tell Exchange 2003 to notify me of any emails transmitted to
and from a particular address? And yes, this in conjunction with #1. I want
to track one user's mail without using delegate or adding myself to their
Active Directory profile and having to create another profile in Outlook.
1. Have a read through this:
http://wm.quest.com/reg/marketing/landing/ediscoveryexchange/. This product
is ideally suited for ...Combining two fields into one in a query for a report
The database I am working on is to keep track of parts that are either in
their storage area (on a shelf) or on an assembly line. I have two fields,
one called Shelf and every part has a shelf assigned to it. The other field
is Line and if a part in on an assembly line, there is a number indicating
that line, if the part is on it's shelf, the word STOCK appears in the line
field. (Has to be this way for the rest of the database to work, so this is
not up for question) Now, I need to creat a report to show where all parts
are. If they are on a line the result needs to show the l...transferring money from one computer to another
I just got this laptop which I really like, but
unfortunately, I can't figure out how to get my MS Money
program (not the files-- that's a no-brainer) to my new
computer. I downloaded the program and did not get the
CD for it. Is there a way to do it? Both of these
computers are mine, so I should be able to, but I can't
figure it out.
There are almost no apps that can be moved from one machine to another these
day. Almost all require having the installation routines. This is why I
always recommend against "download" installations.
&qu...mstsc fails to connect on one of two laptops
I have to nearly identical HP laptops. Both are the same model, both are
running Vista64 Home Premium. With mstsc, I can connect to my XP Pro SP3
system with no trouble at all. But on the other one, the connection fails
with an illuminating "Cannot connect" message. No details as to why. I tried
copying the Default.rdb file from the machine that can connect to the other
one. That made no difference. I tried connecting as a different user,
creating another .rdp file, but that didn't work either.
In article <#UUSfR4wKHA.3564@TK2MS...One-to-one relationship
I am importing a DB from Filemaker with info about students (names, address,
etc.). There is just one table and because it has been used for many years,
it cannot be changed. I have created another table for additional student
enrollment information. I have created a one-to-one relationship between the
two tables using an autonumber primary key in the student table and a number
primary key in the enrollment table. I have created two forms to add
information to the tables. All new students are added via the old student
form first. When I switch to the new student form, I can...Pull publishers up and only one out of ten pages shows up. Why?
I am using Publisher 2003. I made a booklet and had 60 some odd pages on it,
but when I pull it up now only 1 page shows. Why? and what have I done or
can do to correct this problem?
...text from one column into multiple columns
How can I take text entered like this:
Mike Smith Toyota
123 Main St
Anytown, TX 12345
phone 713 222 1212
fax 713 222 2121
....and move it to where every address element (name, street, city, etc.) is
in its own column? Text to Columns obviously won't work, and I've had no
luck trying to make a macro to do it.
do you always have the same amount of rows per record?
Jeff Brown wrote:
> How can I take text entered like this:
> Mike Smith Toyota
> 123 Main St
> Anytown, TX 12345
> phone 713 222 12...no one can solve this one
a new problem on my computer. whenever i click on a
hyperlink of an email address, 64 new page windows pop up
and then a warning message that states, cannot perform
task because default email is not installed properly.
so i downloaded the updates from microsoft and it still
it only happens with email hyperlinks. hyperlinks to
other pages are fine.
...How do I merge 3 lines of text to show in one row?
I am doing a family history excel document. One row should have approx. 3
lines of info, however, I can only get one row of info to show. When I
dclick that row the info shows but when I print or do a print preview only
one line of info shows. I have merged the cells in that row.
It sounds like you need to select Wrap Text from the Alignment tab of the
Format Cells dialog and/or increase the height of the row to accommodate the
numbers of rows of text in the cell.
"pita29" <email@example.com> wrote in message