Excel & Access Reporting

I have a report in access where I am extracting some data out of excel to
generate the report.  The code runs with out error, but comes out blank.  On
the report the controls are lbl20-lbl27, & txt20-txt27.  All of them are
labels.  In the past I haven't been able to write excel to a text box.  Below
is my code:

  ClosingCount = 20
  CenterCount = 40
  CellNum = 3
  PercentVAR = 5#
    Set XLAPP = GetObject("Excel.Application") 'checks to see if an instance
of excel is running
    If Err.Number <> 0 Then ' excel was not running
      Set XLAPP = CreateObject("excel.application") ' creates an instance of
    End If
    XLAPP.Visible = True
    XLAPP.displayalerts = False
    XLAPP.UserName = "PostCloseAnalyst1"
    'Opens workbook
    SysCmd acSysCmdSetStatus, "Opening Excel"
    XLAPP.Workbooks.Open filename:="G:\Users\Post Close\clserr\NewPostClosing\

    Do While ClosingCount <= 27 And PercentVAR > 4.49 / 100
    XLAPP.Range("B" & CellNum).Select
    PercentVAR = XLAPP.activecell
    If XLAPP.activecell >= 4.49 / 100 Then
        XLAPP.activecell.Offset(rowOffset:=0, columnOffset:=-1).Activate
        Call CheckCenter(XLAPP.activecell) 'NJM 12/10
        If bCenter = False Then 'closing errors
            XLAPP.activecell.Offset(rowOffset:=0, columnOffset:=1).Activate
            tempT = "txt" & ClosingCount
            memorandumNJM.Controls(tempT).Caption = XLAPP.activecell
            XLAPP.strCellLoc = XLAPP.activecell
            XLAPP.activecell.Offset(rowOffset:=0, columnOffset:=-1).Activate
            tempL = "lbl" & ClosingCount
            memorandumNJM.Controls(tempL).Caption = XLAPP.activecell
            memorandumNJM.Controls(tempT).Caption = Format(memorandumNJM.
Controls(tempT).Caption, "#0%")
            ClosingCount = ClosingCount + 1
            End If
    End If
    CellNum = CellNum + 1

Any help is appreciated.

Message posted via AccessMonster.com

1/11/2008 4:39:05 PM
access.reports 4434 articles. 0 followers. Follow

0 Replies

Similar Articles

[PageSpeed] 30


Similar Artilces:

How do I create project schedule using excel
I need to create a project schedule using excel. Please help. Hi lack of details :-) Maybe give some more information what you're trying to do? -- Regards Frank Kabel Frankfurt, Germany raeisza wrote: > I need to create a project schedule using excel. Please help. ...

Printing an Excel doucument
In this example, I have a document of 100 pages, when I print the document, the column headers only print on the first page and not the subsequent pages. also I would like all the pages to be numbered. is therea fix for this? Hi Richard, For your first question goto File>Page Setup>Sheet tab and look for the option 'Rows to repeat at top' For your second question goto View>Header and Footer and look at the &[page] and &[pages] options in your footer. HTH Martin ...

Newbie: How to Access Controls on a Dialog
I'm making my first stab at an MFC program. Basically a dialog box with some controls. I started out with basic edit boxes placed on the main dialog using the resource editor in VC++ (6.0). To set text, I have been using the SetDlgItemText(IDC_MYEDITBOX, "Sample Text"). Works fine. Now I working with Check Boxes. Okay, placed it using the dialog editor. Looked for some sort of equivalent to SetDlgItemText to check and uncheck the box using the control ID ("IDC_MYFIRSTCHECKBOX"). Nothing. Reading through Prosise's "Programming Windows with MFC"...

my printer ejects a blank sheet prior to printing with EXCEL

Excel: extract and sum numerals from mixed text/numeral cell range
I have a large (30x20) grid of cells with data, and I want to extract and then sum up certain numerals from this entire range. The catch is that the data is mixed numerals and text, as you'll see below. Here's an abbreviated 3x3 example, with a value in each of the nine cells: V7.1 T H P1 A T B V3 P4.5 If I just wanted to sum up the instances of "T" appearing, I could use COUNTIF() for the entire range to come up with answer ("T" appears 2 times). Easy enough. But, what I'm trying to accomplish is to sum up the numerals associated w...

Error in formula displayed for linear and 2nd order curve fits in Excel 2003
I have created trendlines for some pretty simple data using both 2nd order polynomial and linear fits. In both cases, the displayed formulas have their 1st and 2nd order coefficients wrong by a factor of 10!! (I have read lots of posts about increasing precision but this is not what I am up against). Has anyone seen this? What version of Excel? Could you include the data in a follow up post (not as an attachment), along with the coefficients you've computed? - Jon ------- Jon Peltier, Microsoft Excel MVP Tutorials and Custom Solutions Peltier Technical Services, Inc. - http://PeltierT...

Windows Update
My problem is similar to someone else's below(about Excel 2003 not being able to update), the only difference is that I don't want Excel to update at all. I don't even use it. But the yellow shield kept telling me that it had 1 update available, which was Excel 2003, so, out of annoyance, I installed it. After failing to install several times, I decided to uninstall Excel from Microsoft Office(Pro Edition 2003). Even after uninstalling Excel, I still got the windows update alert. How do I stop it? Extra info: When windows update first appeared, I did a custom instal...

Sub Report Link with Stored Procedures
Hello, I am having a problem with a report and subreport. The main report is a stored procedure and there are 3 parameters (@EndDate datetime,@ChartID int,@GroupID int). I provide the values in the "Input Parameter" of the Main report. For the Sub Report, I have the same three parameters and I place the values also in the "Input Parameter" of the sub report. The field that I link the sub report to the main report on is "AcctLogID". The problem is this link. If I change the control source of the sub report to just a regular query, the report runs fine ...

excel axes
how do I create a secondary horizontal axis on an xy scatter plot? forgot to mention 2008 excel using Leopard (10.5.2) ...

Excel program
I have a simple program in excel for data entry. When I protect the sheet, and use tab to move about within the spreadsheet, sometimes the tab button will not move the cursor to the next cell. It will pick a random cell to go to next. Is there a way that I can designate what cell it will go to next. Thanks for your help, jb On a protected sheet, it is going to the next unprotected cell. So, if you don't want it to go to a cell, protect it. "JB" <jgblanton@hotmail.com> wrote in message news:093a01c391d0$ae57f190$a301280a@phx.gbl... > I have a simple program in exce...

2003 Excel and 2007 Trial Version Excel
I downloaded the 2007 trial version of Microsoft Office. Now my trial is over and I reloaded my 2003 version. But it will not let me remove the 2007 trial version. Also when I go into my 2003 Excel a Window Installer box comes up that says Preparing to install and this stays on for about 5 minutes before it goes away. I know that I should not have downloaded the trial version but I did. Can someone please help me. I have Windows XP and it is my office computer. Please help! ...

Error Message When opening Excel
I am using Windows VISTA 64 bit O/S with Office Professional 2003 All of a sudden I started to get the following error message: 'One of your object libraries (Stdole32.tlb) is missing or damaged. Please run setup to install it' I am at a loss as how to correct this. I checked online and found some instructions that were for Windows 2000 Those did not work for VISTA at all. Thank you in advance for your support and suggestions, HankL It is telling you to do a "setup to install" on the Office product, did you try that? Did you try doing a repair on ...

MFC: Excel Automation Can't Quit from Excel. Please help...
Hi I use MFC Visual C++ 4.2. I am automating Excel from my application. My problem is I cannot quit the Excel after the automation process finished! I checked it still exists on the Process lists and the most DANGEROUS is everytime the automation function run, it create other Excel and so on. So it must be out of memory soon. I have used the app.Quit() method like all the people used but it DOES NOT work. What should I do? Thank you. I happened to answer this on the office.developer.vba newsgroup. You most likely have neglected to Release() the automation object. joe On Wed, 3 Sep...

Excel number / date conversion
I've just pulled some data out of an ODBC connection into Access an then exported it to Excel. The dates are currently in the format 20031109. But the built in dat convertor (from Format Cells) doesn't do anything, even if I convert i to a 'proper' number first. How can I convert this to 09/11/2003 so that I can do some date - base arithmetic and work out difference in days -- markperr ----------------------------------------------------------------------- markperry's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=2759 View this thread: http://w...

Excel charts should allow "switching" series on or off
A plot (chart) of time series data may be used for many purposes. From my use two reasons I use such plots are: Studying individual time series trends; and Overall impression of all results. But when studying multiple time series data a chart can become cluttered. It would be useful if individual series could be seleceted as visible or invisible so that they could be evaluated without losing the total plot. At the moment the only way to "unclutter" the plot is to remove the temporaily-unwanted series but it can be time consuming to reconstruct the plot. ---------------- Thi...

Email from Excel #3
Is it possible to have Excel send an email if the value of a certain cell is changed? Hi see your post in public.excel -- Regards Frank Kabel Frankfurt, Germany "berj" <berj@adelphia.net> schrieb im Newsbeitrag news:CcSdndsVDJy4jcjcRVn-pQ@adelphia.com... > Is it possible to have Excel send an email if the value of a certain cell is > changed? > > ...

version excel
bonjour a tous, & a tous les pro bien sur es qu'il est possible ,que des l'instant on modifie le code VBA EXCEL on incremente un compteur pour les mise a jour cela me semble plus simple merci pour vos reponse patrick.villa@laposte.net +++++ http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- --- HTH Bob (change the xxxx to gmail if mailing direct) "pounet" <patrick.villa@laposte.net> wrote in message news:1165418782.552172.169740@j44g2000cwa.googlegroups.com... > bonjour a tous, & a tous les pro bien sur > > es qu'il est possible ,qu...

Historical Stock Status Report and average cost
How do you change the average cost of items to be reflected in the historical stock status report? For example, the average cost was $30.00 and the current cost was $30.00. Transaction for this item cost ranges from $28.00 to $32.00. The accountants wanted the Historical Stock Status Report to reflect a cost of $31.00 for this item. We changed the trx costs to $31.00 in Utilities but the current cost still remains at $30.00. Is there a way to update costs in this report to reflect new cost amounts as per above? Hi, You can change an Average Perpetual valuated Item's current cos...

Can't access my newspaper in Outlook any more
For years, I have been reading my daily newspaper via my Outlook. It is delivered daily via e-mail. Today, it was delivered via e-mail as alwys, BUT I was not allowed to open it. The message from Outlook says that it had been blocked and to contact my system administrator. Since I am using my home computer (as always!) I am wondering what gives. Does it have anything to do with the Outlook Connector items that were downloaded automatically sometime recently without warning. If you put the attachment on your desktop,can you open it then ??? -- Peter Please Reply to Newsg...

double line spacing using excel 2000
I have a paragraph of writing, how do i get the text to be double line spaced? I am using excel 2000. Excel doesn't have a line spacing setting. You could add line breaks by pressing Alt+Enter at the end of a line, then another Alt+Enter to create a blank line. Dan wrote: > I have a paragraph of writing, how do i get the text to be double line > spaced? I am using excel 2000. -- Debra Dalgleish Excel FAQ, Tips & Book List http://www.contextures.com/tiptech.html Does this aply to newer versions of excel? "Debra Dalgleish" wrote: > Excel doesn't have a...

Excel 95 to Excel 2003
Anyone know if it's possible to convert Excel 95 files to Excel 2003? If so, how. Thanks in advance Open the file in 2003 and SAVE as you would a file created in 2003. If not absolutely positive, save as a different name. -- Don Guillett SalesAid Software donaldb@281.com "Cooper" <kcooper2@austin.rr.com> wrote in message news:uqLpEuG4EHA.1292@TK2MSFTNGP10.phx.gbl... > Anyone know if it's possible to convert Excel 95 files to Excel 2003? If > so, how. > > Thanks in advance > > Open in XL 2003, when you close it, it should, ask you if you w...

Enable Send To reports with Adobe elements.
We have Adobe elements and the Send To button is enabled when we send a report to screen. But when we press it nothing happens. Could this version of Adobe be made compatible with the send to option? the print to PDF option works fine though. Thanks -- Frederik Gagnon Analyst Programmer Dexterity Engineer ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the...

Append data to table...Access to 97 conversion error
Error 2391, Field 'F1' doesn't exist in the destination table Why do I get this error when I try to append data from a .csv file into an Acces table code line: DoCmd.TransferText acImportDelim, , "Invoice", Filename, False Please help ...

Conversion Excel 97 to Excel 2003
Hi There, I would like to convert Excel 97 files to excel 2003 I m using Save AS, but little bit confuse what type I have to choose "Microsoft Office Excel workbood (*.xls)" or "Microsoft Excel 97 - Excel 2003 & 5.0/95 workbook (*.xls)". We will not use Office 97 anymore next few weeks. Thank for your prompt response. Wayne You shouldn't have to do anything. If you feel the need, just save as microsoft excel workbook.xls -- Don Guillett SalesAid Software donaldb@281.com "Wayne" <anonymous@discussions.microsoft.com> wrote in message news:8286...

Inner Borders in Excel 2007
Before in pre-Excel 2007 world, I used to be able to select a range of cells, click on a button to get vertical or horizontal boarders for the range selected. In Excel 2007 I can only apply outer boarders. Was this feature removed? I now have go to "format cells", then select the "borders" tab to do the same. Where did the buttons for inner vertical/horizontal boarders go? Thanks. louishong - Home ribbon > (Font group) drop down between Underline and Fill Color - Mike http://www.MikeMiddleton.com <louishong@lycos.com> wrote in message...