Need Min Value from Row and Heading Value that Corresponds to it.
I have a table that looks somewhat like this w/o the *'d headings:
h1 h2 h3 h4 h5 h6 h7 *Min Price *Heading
$5.00 $6.00 $3.00 $4.00 $9.00 $1.00 $9.00 $1.00 h6
$3.00 $6.00 $8.00 $65.00 $9.00 $2.00 $4.00 $2.00 h6
$4.00 $9.00 $5.00 $7.00 $1.00 $2.00 $8.00 $1.00 h5
$9.00 $7.00 $6.00 $3.00 $9.00 $8.00 $2.00 $2.00 h7
$7.00 $8.00 $9.00 $7.00 $9.00 $8.00 $8.00 $7.00 h1
I have several SKU's with various price contract/programs. I want to find
the best price in one cell and the heading that would correspond to that cell
I was trying to do this with an expression ...How do I plot Excel data on a floorplan?
I'm trying to find a way to plot data from an Excel worksheet on a floorplan
diagram. The data reflects room assignments for a hospital, so some data
stays the same for days while other data changes on a twice a day basis. I
want to enable someone to be able to enter the data on the worksheet and have
excel output the names, etc in the proper room assignments on the floorplan
automatically. The users could then print this floorplan to locate the
assignments more easily. I can either scan a hardcopy of the floorplan, or I
have access to Visio so I could also quickly construct a d...Not sure if Excel can do what i need
I am obviously a new user to excel. I have a psychological assessmen
that needs to be computerised for ease of use in obtaining results.
Here is what i would like to happen. I have 28 questions with fiv
Likert scale options(0-4) for answers. Each question addresses 1 of
different personality traits. So questions 1, 6, 8, 22 look at anger.
Where as questions 2, 9, 28 look at happiness. What i would like is fo
excel to group the answers and give me the total number for each trait.
Then based on that number, give out a prewritten (which i would provide
result of the assessment.
...Extracting Data #2
I need a help on data extracting...
I have a data abt 12 col and 40 rows with header in each col.
the header like --- Inv no, Inv Dt, Customer Name, amount, chq no
there are mutiple records (ie. rows) for a customer, i want to lis
the records / rows pertining to a customer and make report in a diff
I can do this using advance filter, but if i change the the custome
name resepective rows will not get changed dynamically,
again i have to do the whole process of advance filter..
cud u plz suggest same other method so that records are dynamicall
chan...Excel need help
I have 2 columns a and b . a contains payment b
I have the entire col b with the formula. my ? is
when the balance appearsin b it is in all the cells in that column.I
only want it in the used ones, not the unused ones:( example
this 15790.00 is in col b...not a...I want no bal in unused cells
fiftieslady's Profile: http://www.excelforum.co...Excel newbie needs help from math wiz (poker related)
I want to create a Excel workbook that will help in specific poker
Short version: I want to be able to calculate how often my opponent will
need to fold for an all-in raise to show a positive expectation.
In poker you can win a hand by having the best hand at the end OR getting
your opponent to fold.
A common situation comes up where you have a "drawing hand" and face a bet
by your opponent. In this situation you know you are currently behind in the
hand, but have a chance to win if you catch some of your "outs" (cards that
will give you th...Need Help Linking Sheets
How can I link 2 pages without using the actual sheet as a reference?
In other words, can I have two sheets linked by Identifying the same exact
names one on each sheet?
...Macro help needed........
How do I sort a particular column in ascending order and change the pag
setup to landscape and margins to 0.25 using a macro code ?
does anyone have a macro code for this ?????
Message posted from http://www.ExcelForum.com
you have already received some answers in your previous threads
please don't multipost!
> How do I sort a particular column in ascending order and change the
> page setup to landscape and margins to 0.25 using a macro code ?
> does anyone have a macro code for this ??????
> Me...Need to test a mobo
I had a power surge about 3 weeks ago - lost a drive, now making
ticking noises. I had another two drive that seem to work
sporadically now. So, I thought it might have been my power supply.
Bought a tester and found out that all seems well. Next, I bought a
new hard drive and found that it was also acting up - making noises
like whirring up and down (like the other drives I thought were
dead). So I am starting to wonder if it is my mobo - but how can I
test this out?
I am using a dual boot - Win XP and Win 7 - both drives work and don't
work. Up and down. Right now my Win7 ...Help needed
is there anyway you can see what links to other workbooks are associated with
the workbook you have open.
The problem i am having is when i open the workbook in question a message
appears and states "The workbook you opened contains automatic links to
information in another workbook. do you want to update this workbook with
changes made to the other workbook" Yes....... No. if i click No the workbook
opens, however if i click Yes the workbook just hangs and i have to go into
task manager to shut down the system. I can only assume that there is a
problem with one of the links....Data Lables, series and Scatterplots
Is there any way to get excel scatterplots to recognize a third column (or
row) as a series for a scatterplot? FOr example I have data as:
Sequence Long Lat
1 49.12 28.05
2 49.17 28.34
3 49.5 28.48
4 49.17 28.36
I would like to plot Long(itude) as X axis and Lat(itude) as Y on
scatterplot (which I can do). But I would also like to identify the sequence
number fopr each point. I thought I could do that by getting the Sequence
numbers to represent a series, but can't sseem to get that in a scatterplot.
Is there any other chart...Data Validation to exclude blank cells
I have a list spreadsheet with invoice details on it. SHEET 1 - Column A
lists invoice numbers. Column B lists individual items on the invoice (i.e.
parts sold). Further information in column C to F (invoice date, amounts,
On SHEET 2, I want to create a validation list which you can use to select
invoice numbers. Once an invoice number is selected, vlookup will be used to
pull through information in column C to F.
I know how to use vlookup, and to create custom lists so there is no problem
The problem I do have is column A has blanks in it (i...Deleting blank lines between data lines
I have a worksheet with about 2,000 lines of data. The problem is tha
every other line is blank. I cannot sort here because some
information is carried over to the third line.
1 data 1a
2 blank -->
3 data 1b
4 blank -->
5 data 2
How can I eliminate just the blank lines and maintain the order
that the data list is currently in?
~~ Message posted from http://www.ExcelTip.com
~~View and post usenet messages directly from http://www.ExcelForum.com
One method that may help you.
Say you had data in r...Counting Data from Multiple Records
I am tasked to generate an Access 2007 report providing the number of
times a person has participated in each of several positions at our
The master table (tAllRecs) contains everyone's names and member numbers
(key), among other things that don't matter for this report (addresses,
phone numbers, etc.).
The event table (tEvent) contains the Event Number (key) and a field for
each of the 40 positions we need to fill at each event (fPos01, fPos02,
The report needs to list the number of times each member has served in
...Need help on this....thanks
I have an Excel worksheet which stored a survey outcome of over 1200
members. There are over 30 questions in the survey and the first column
captured the member ID. The problem is 3 of the survey questions that allow
multiple answers, instead the answer for those three questions are captured
in seperate column, the answers are stored in a single column and it makes
it very difficult to analysis those result. As a result I created
addittional columns depending on the total number of the answers available
for that question and assign the result manually to that column. It is very
time consuming ...Repeat Data from Cell Above
I have a report that has been imported in to XL and am trying to wor
with the data but have a pain staking task ahead.
Serial No TitleName Units
35270 International Views 20
41155 RoloText 12
My goal is to have the TitleName repeat in the blank cells, as th
values in the adj. cells belong to TitleName.
-----------------------------------------------------------...need help badly
How do you print ole objects..
Message posted via AccessMonster.com
On Wed, 03 Oct 2007 18:13:40 GMT, "misschanda via AccessMonster.com"
>How do you print ole objects..
What *kind* of OLE objects? Many of them are binary blobs (such as programs)
which are inherently not printable. More details please!
John W. Vinson [MVP]
...I need Help
I have a random popup that i cant stop,when it does come up it seems to know
what i was looking at,like when i was looking for registry cleaner it popped
up and showed me one,any help would be great.
On Jan 22, 6:57=A0am, Larry <La...@discussions.microsoft.com> wrote:
> I have a random popup that i cant stop,when it does come up it seems to k=
> what i was looking at,like when i was looking for registry cleaner it pop=
> up and showed me one,any help would be great.
To eliminate questions and guessing, please provide additional
information about your sys...combining data
I have two sets of data (1) Jan - June and (2) July -
December. The reason I have the data on two different
sheets is because it goes past the number of rows allowed
I would like to run one report, Pivot Table, to show Jan -
Is there a way to do this?
Thank you in advance for your help.
...Stuck in review and need to be in design.
I am using Visio 2007. I need to complete the diagram that I have been
working on and I hit the review key by mistake. How do I get back to the
On Wed, 4 Nov 2009 16:14:01 -0800, cameron <email@example.com> wrote:
>I am using Visio 2007. I need to complete the diagram that I have been
>working on and I hit the review key by mistake. How do I get back to the
menu Tools -> Track Markup
and then close the Review window.
Regards, Paul Herber, Sandrila Ltd.
DFD/SSADM for Visio http://www.visio-dfd.sa...Need Help Despertly!
I am in a desperate situation.
I had to reformat my hard drive. Prior to do this, I copied my entire User
Profile to another drive. I can now access my User Profile information from
Now that I installed Microsoft Outlook, I do not see any of my Contacts.
I need to restore my Contacts to the new Outlook installation. Again, I did
save my entire "User Profile" from my previous installation of Windows 2000
Professional. I just do not know how to access my Contact information from
Outlook that included addresses and phone numbers and such.
Any help would be greatly appr...Plug in needed
Looking for an Outlook plug in which, on reply to a e-mail, will:-
a) allow selective quoting only, and
b) not top quote.
Anything around at all?
Much to my horror (sorry guys) the Boss wants us to use Outofluck at work!
On the carpool lane lane to Nirvana.
John Phillips <firstname.lastname@example.org> wrote:
> Looking for an Outlook plug in which, on reply to a e-mail, will:-
> a) allow selective quoting only, and
> b) not top quote.
> Anything around at all?
The best Outlook adjunct I've found for quote handling on replies is
Outlook-Quotef...What is the Need for XSD in Application Blocks designing
Can anyone help in clearing my doubt
There is a need for me to implement Application Blocks in my project,
(Basically 3 tire), the project comprises of UIL, BLL,Business Entities,
DAL.. When i saw the example programs from User Interface Application Block
example, which is implementing the Business Layer part, Interface for BLL
and Business Entity part where by i am not able to understand the real usage
of XSD's and the autogenerated C#? Can anyone explain me what is the process
flow behind this fuda in a simple terms.
Thanks in Advance
...Summary of data using array formula
I have a spreadsheet where there are several columns with data using
validation picklists as well as free-entry columns. I would like to create a
summary of the data in the form of counts based on the existence of specific
values in these columns with the ability to change the date range. I've
created the array formula and have set up a 'startdate' and 'enddate' cells
where the user can enter the range they're looking for. No matter what I do
the value always reports a zero.
I have used these types of array formulas before, however, not using date
rang...Need to Hire Outlook 2003 Help
I'd like to hire someone that can walk me through some specific stuff
with outlook 2003
I'm using the Lotus Notes to Outlook plugin
My compnay is a Notes shop - which means I get NO support for outlook
--- this plugin is a god send and i want to make sure I get it set up
It's coming out of my pocket but I'm willing to pay if I can find the
right person to help me
Please post ideas here or email me