Finding a Median
I'm trying to write a query that will return a median for various values taken from a previous query. I've seen some suggestions in my searching, but I haven't been able to get them working. They are also all from before 2003 and refer to Access 97 and 2000. Has any functionality been added to 2003 for this? Or is there a non- code-based way to do it? I've seen it suggested to write a code to open the query, sort it, find the total number of records, divide it in half, then seek out the middle record using that value. I'm still very green when it comes to code, though. Thank you in advance for any assistance.
|
0 |
|
Eric
10/23/2007 4:23:05 PM
access.queries
6343 articles. 
1 followers.
1 Replies
1471 Views
It has not been added, neither in Jet, neither in MS SQL Server. You can write a query that does it (Joe Celko did proposed a solution some times ago), but the solution with the recordset is faster. Note that part of the problem is that the procedure is different if there is an odd or an even number or elements. If there is an even number of elements, the definition is to average the two middle values. A good VBA solution is to seek at N/2 rounded up, and to get that value in an accumulator, move to the next record ONLY if N is even, then, in all case, read the value of the record you are on, and add it to the accumulator, and finally, divide that result by two (indeed, if N is odd, you have read twice the same value, not having done any record move). Indeed, if N=40, you will read record at rank 20 and at rank 21; while if N=41, you read the record at rank 21, twice. That VBA solution should be faster than an SQL one since the second step is almost free in VBA, moving to a next record, while SQL will need to reach the whole table (or half of it) a second time. That is not a very hard 'proof', but it is enough, for me, to not try to seek an SQL solution to that problem which would be faster than VBA. Vanderghast, Access MVP "Eric D. Braden" <bradenericd@hotmail.com> wrote in message news:1193156585.129438.69020@e9g2000prf.googlegroups.com... > I'm trying to write a query that will return a median for various > values taken from a previous query. I've seen some suggestions in my > searching, but I haven't been able to get them working. They are also > all from before 2003 and refer to Access 97 and 2000. > > Has any functionality been added to 2003 for this? Or is there a non- > code-based way to do it? I've seen it suggested to write a code to > open the query, sort it, find the total number of records, divide it > in half, then seek out the middle record using that value. I'm still > very green when it comes to code, though. > > Thank you in advance for any assistance. >
|
|
0 |
|
Michel
10/23/2007 6:20:07 PM
Similar Artilces:
I need to compare 3 numbers and find the one in the middle
I have three numbers in a single row and would like to identify the middle number enter that number in another cell. Example: 1st # 2nd # 3rd # result 628 678 720 678 655 625 700 655 748 720 725 725 is there a function in excel that can do this? Thanks, Eddie Try =LARGE(A1:C1,2) VBA Noo -- VBA Noo ----------------------------------------------------------------------- VBA Noob's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=3383 View this thread: http://www.excelforum.com/showthread.php?threadid=56811 fasteddie wrote.....
Find Duplicate names and delate
Dear experts, I have a small doubt could you clarify that??? That is I find duplicate name but I want to delete one name only, if I filter DUPLICATE….. both names are showing… 1. Select the range of data including the header. You need to have headers for these columns 2. From menu Data>Filter>Advanced Filter>Copy to another location 3. In 'copy to' specify the target cell and check 'Unique records only' 4. Click OK will give you the unique list -- Jacob "Find Duplicate names and delate" wrote: > Dear experts, > I have a small ...
Finding a Median
I'm trying to write a query that will return a median for various values taken from a previous query. I've seen some suggestions in my searching, but I haven't been able to get them working. They are also all from before 2003 and refer to Access 97 and 2000. Has any functionality been added to 2003 for this? Or is there a non- code-based way to do it? I've seen it suggested to write a code to open the query, sort it, find the total number of records, divide it in half, then seek out the middle record using that value. I'm still very green when it comes to code, though...
Find a Value the first Time It Occurs
I have a row of values that shows the total cumulative number of sales of items by month. Occasionally, there may be no sales in a month for an item so the cumulative value would stay the same for more than one month. I want to select a number in the row the first time it occurs and not select it if it repeats. What are you wanting to do with the info? To return position (column number) of number 1234 within row 2: =MATCH(1234,2:2,0) A formula that signals it's the first occurence: =COUNTIF($A2:A2,A2)=1 This could be used in a helper row, or as a conditional format f...
Find/Replace in RichEdit 2.0
I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my CRichEditDoc/View application so that I can use the ITextDocument interface and can do things such as suspend/resume the Redo buffer. Problem is, now the Find/Replace dialogs don't seem to do anything. If I revert back to RichEdit 1.0 they do! What's going on? BUMP! adriangibbons@yahoo.co.uk (Adrian Gibbons) wrote in message news:<34a2acd5.0404130713.123dbaab@posting.google.com>... > I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my > CRichEditDoc/View application...
Find (but not find)
My program takes a name from sheet3 goes to sheet1 to Find the name. If it cannot find name, how do you do an If/End to Exit Do while or find out if name has been founf? I have "On Error Resume Next" in program. Thanks again for all your help Gordon As ALWAYS, post your code for comments & suggestions. -- Don Guillett Microsoft MVP Excel SalesAid Software dguillett1@austin.rr.com "Gordon" <gwelch1938@yahoo.com> wrote in message news:1184612089.486737.144020@n60g2000hse.googlegroups.com... > My program takes a name from sheet3 goes to sheet1 to Find the na...
Finding an event
Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button, a new window (in same workbook) opens with a new sheet. My problem is that excel does not seem to have any events for close of window if there are multiple windows in a workbook. Can someone help Peter Peter, That triggers the Workbook_WindowActivate event, you can use that. HTH Bob "Peter Ostermann" wrote in message news:i9m5v8$7bv$02$1@news.t-online.com... Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button...
Find value in a column and insert rows above
The set up looks like this: ColU ColV ColW ColX Y N N N Y N N N N Y N N N N Y N N N Y N N N Y N N N Y N N N Y Y Columns will always be U through X and will always be sorted in this order. I need to find the first Y in each column and insert 2 rows above that row. On the blank row above the first Y, I need to highlight in yellow and put title in the first cell, such as New, Old, Existing, Deleted. Any help would be greatly appreciated. Thanks for your time, Dee If desired, send your file to my address below. I will only look if: 1. You send a copy of this ...
Sum if Condition is Equal in Range Date and find column
I want to make a sum if Range is a week number and if style is Equal to CONC-92 or CONC-45 Week# 49 Week# 50 CONC-92= 27 CONC-92= 30 CONC-45= 27 CONC-45= 30 Datas are in a pivot table and... Pivot table looks like this: Date CONC-92 CONC-45 CONC-92 CONC-45 12/7 5 5 10 10 12/8 2 2 10 10 12/9 5 5 10 10 12/10 5 5 10 10 please help -- Lorenzo Díaz Cad Technician ...
cannot find database
I have an excel spreadsheet that is supposed to update a access db. Whenever I try to save the .xls I get an error stating cannot find db. Even when I open the db with access, I get the error and the db opens anyway?????? This only happens on 2 out of 20 pc's and I cannot figure out why???????? Thanks ...
Trapping a NO FIND after a find
I use the code below to store a row number to a variable after a find. I would like to trap a NO FIND if the find is unsuccessfull Any ideas. FSt1 provided the code below Sub macfindrow() dim rn as string dim rng as range dim therow as long rn = inputbox("enter something to find") if rn <> "" then Set rng = nothing Set rng = range("A1:IV65536").Find(what:=rn, _ After:=Range("A1"), _ Lookin:=xlformulas, _ Lookat:=xlpart, _ ...
How do I find the out of office reply?
My out of office reply is missing from tools. How can I retrieve it? Out of Office reply <Out of Office reply@discussions.microsoft.com> wrote: > My out of office reply is missing from tools. How can I retrieve it? Unless you are using an Exchange server, you will not have the Out of Office Assistant. See this: http://www.slipstick.com/rules/autoreply.htm -- Brian Tillman ...
Finding numbers in rows and highlighting them
Hi everybody :) I need help. This is a lotto system. I have a spreadsheet with 508 rows and 45 columns. In each row there are 45 numbers mixed (1 to 45). I need a script or some other way to find where particular (drawn) numbers are in each of the 508 rows. If my explanation is not clear please ask for farther clarification. Thank you in advance for your help. Joh -- Johncobb4 ----------------------------------------------------------------------- Johncobb45's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1658 View this thread: http://www.excelforum.com/showt...
How do I find data from a list (or table) and insert it in a row?
I used to use a spreadsheet program (2 years ago) that allowed me to lookup an item and insert it into the worksheet. I know the program was at least a year old at that time (2002). How do I create a list, reference it , and then insert an item into a row of my choice? Example: Make of item, item description, and cost. Does the data go on one worksheet and then get referenced and inserted into the list of another worksheet? If so, how? I can't seem to get any answers by reading books on the subject. I no longer have access to the old workbook from which to study. Maybe that ...
Advanced Find not finding all
"Advanced Find" in Outlook 2007 is not finding all email messages which match the criteria. It finds between 30 and 200 and then stops. I then have to work with those (e.g., delete them) and then click "Find Now" again to find another batch, dozens of times! What is wrong? How do I fix this and find all messages that match the criteria? My typical application is to split the entire contents of my .pst files by date. Do do this I make a copy of the file. In one I delete all messages older than the cutoff date (e.g., 1/1/2007), and in the other I delete all messages yo...
How to: find reason for rejected messages?
I'm trying to find the reason, why certain messages get rejected by our exchange 2000 server. Is there a way to find out? Scenario: pullmail gets mails from pop3 mailboxes from, let's say "internetmailserver.com" and puts it in our exchange server "intranet.com". For most mails it works marvellous but for some mails it just fails and I can only see (output of pullmail command): .... 1 messages waiting << +OK 8488322 octets Message from: some.user@validdomain.com to: user@intranet.com SMTP message rejected, reply OK Unexpected response rsion:...
Can "Totals" be displayed in Advance Find results?
This seems like a question that would've been asked many times before, but I can't find any reference to is here. Can total search results be displayed in the search results pane? The only reference to a solution for this is by a company in Romania called Creative Software Solution. They have a screen grab at http://www.creativesolutions.ro/img/Customizations-GridCount.jpg. Anyone know how I can make the customization myself? Thanks! Andy. Dear Andy, There are few options. 1. Writing Reports and show total 2. Add Total as custom value and use javascript to add that va...
finding latest hotfix
how do I find latest hotfix for Project Server 2007, Sharepoint server 2007 and SQL serve 2005? For Service Pack we can search using bing or google and find. But not for hotfix. How do I find? Thank you Hello all the latest updates are documented here: http://technet.microsoft.com/en-us/office/ee748587.aspx -- Christophe Fiessinger Microsoft http://blogs.msdn.com/chrisfie "sgOrchid" <sgOrchid@@newsgroup.nospam.com> wrote in message news:3B51FE4E-ADD6-415D-9771-CCD32A65DF11@microsoft.com... > how do I find latest hotfix for Project Server 200...
find formula and return value
Hi i am using the following formula to find text in a cell =IF(ISNUMBER(FIND("Super",B96)),"OK", "Not OK") and return a value. i have adapted the formula for another spreadsheet and simply added more values to check, i.e. =IF(ISNUMBER(FIND("Super""Account""Business:,B96)),"OK", "Not OK") but it doesnt seem to work. where i can see the value in the cell it is not returning ok instead of not ok. is there a limit to the number of values i can search and if so why doesnt it say as an error? what am i missing? Thanks v...
"FIND" bar is broken / missing
In IE8, when I click CTRL-F for the "Find on this page" bar, a BLANK bar appears but no controls on it. I uninstalled IE8 and reinstalled it, but it made no difference. Any ideas? I used to use this feature a lot, so this is pretty frustrating. I would appreciate anything you can tell me. Thank you. RecoverfileinRecycleBinwhileinDOS@discussions.microsoft.com wrote: > In IE8, when I click CTRL-F for the "Find on this page" bar, a BLANK bar > appears but no controls on it. I uninstalled IE8 and reinstalled it, but it > made no difference. Any id...
find smallest positive number among datas
How to find the smallest positive number among datas in Excel? Try =MIN(data_rng) -- HTH Bob "Cerberus" <Cerberus@discussions.microsoft.com> wrote in message news:8616B833-5582-4FCE-A23C-5F10D577AF63@microsoft.com... > How to find the smallest positive number among datas in Excel? =MIN(IF(A1:A6>0,A1:A6)) as an array formula (Control Shift Enter) Adjust your range to suit. -- David Biddulph "Cerberus" <Cerberus@discussions.microsoft.com> wrote in message news:8616B833-5582-4FCE-A23C-5F10D577AF63@microsoft.com... > H...
Finding an item in a listview
There has to be a way to find a specific item in a specific column in a listview. I have a list view of people and then I allow the user to pop up a dialog box that allows them to enter search text into a field and it finds all the records that qualify and displays them in a listctrl inside the dialog box and then I want them to be able to click on the record they want and go to that record in the main list view. Yes. Using GetItemText, you can examine the contents of any listview item. Simply iterate through the items and compare each one. In article <OOW30AriDHA.560@tk2msftngp13.p...
Find, Delete row, Loop
Hello, Trying to automate the following: 1. Find a string of characters ("apple") that apprear numerous times in the spreadsheet. 2. When found delete the entire row. 3. Loop until the spreadsheet has no more instances of "Apple" Many Thanks! Dave apple or Apple ?? -- Gary''s Student - gsnu200816 "Dave Coz" wrote: > Hello, > Trying to automate the following: > 1. Find a string of characters ("apple") that apprear numerous times in the > spreadsheet. > 2. When found delete the entire row. > 3. Loop until the spreadsheet h...
How to find PowerPoint version on mac
Hi, In my C++ program I need to find the version of PowerPoint on mac, on windows I am doing this using FileVer.exe. Is there any equivalant of this on mac, Can I use applecsript for this? Thanks in advance Rahul In article <edaa1210-0954-478a-a0e8-6d146726e9f3@f18g2000prf.googlegroups.com>, RAHUL <rsharma.champ@gmail.com> wrote: > Hi, > > In my C++ program I need to find the version of PowerPoint on mac, on > windows I am doing this using FileVer.exe. > > Is there any equivalant of this on mac, Can I use applecsript for > this? > > Thanks in adva...
How do I find...
Ok Question 1: Just finding Basically I need to find all Exchange mailbox enabled AD accounts that are disabled (within AD). (Yes a disabled AD account that has a mailbox.) Within “Active Directory Users and Computers” I can find all mailboxes but I want just the ones who’s AD account is disabled. Question 2: Deleting only the mailbox. Ok once I have the list of these disabled AD accounts that have mailboxes – How can I delete their mailboxes without removing the AD account. (I’m sure there are at least 100 so didn’t want to do this one at a time.) Anyone? Hi You can use "Act...
I have three numbers in a single row and would like to identify the middle number enter that number in another cell. Example: 1st # 2nd # 3rd # result 628 678 720 678 655 625 700 655 748 720 725 725 is there a function in excel that can do this? Thanks, Eddie Try =LARGE(A1:C1,2) VBA Noo -- VBA Noo ----------------------------------------------------------------------- VBA Noob's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=3383 View this thread: http://www.excelforum.com/showthread.php?threadid=56811 fasteddie wrote.....
Find Duplicate names and delate
Dear experts, I have a small doubt could you clarify that??? That is I find duplicate name but I want to delete one name only, if I filter DUPLICATE….. both names are showing… 1. Select the range of data including the header. You need to have headers for these columns 2. From menu Data>Filter>Advanced Filter>Copy to another location 3. In 'copy to' specify the target cell and check 'Unique records only' 4. Click OK will give you the unique list -- Jacob "Find Duplicate names and delate" wrote: > Dear experts, > I have a small ...
Finding a Median
I'm trying to write a query that will return a median for various values taken from a previous query. I've seen some suggestions in my searching, but I haven't been able to get them working. They are also all from before 2003 and refer to Access 97 and 2000. Has any functionality been added to 2003 for this? Or is there a non- code-based way to do it? I've seen it suggested to write a code to open the query, sort it, find the total number of records, divide it in half, then seek out the middle record using that value. I'm still very green when it comes to code, though...
Find a Value the first Time It Occurs
I have a row of values that shows the total cumulative number of sales of items by month. Occasionally, there may be no sales in a month for an item so the cumulative value would stay the same for more than one month. I want to select a number in the row the first time it occurs and not select it if it repeats. What are you wanting to do with the info? To return position (column number) of number 1234 within row 2: =MATCH(1234,2:2,0) A formula that signals it's the first occurence: =COUNTIF($A2:A2,A2)=1 This could be used in a helper row, or as a conditional format f...
Find/Replace in RichEdit 2.0
I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my CRichEditDoc/View application so that I can use the ITextDocument interface and can do things such as suspend/resume the Redo buffer. Problem is, now the Find/Replace dialogs don't seem to do anything. If I revert back to RichEdit 1.0 they do! What's going on? BUMP! adriangibbons@yahoo.co.uk (Adrian Gibbons) wrote in message news:<34a2acd5.0404130713.123dbaab@posting.google.com>... > I'm using Windows ME and I've switched from RichEdit 1.0 to 2.0 for my > CRichEditDoc/View application...
Find (but not find)
My program takes a name from sheet3 goes to sheet1 to Find the name. If it cannot find name, how do you do an If/End to Exit Do while or find out if name has been founf? I have "On Error Resume Next" in program. Thanks again for all your help Gordon As ALWAYS, post your code for comments & suggestions. -- Don Guillett Microsoft MVP Excel SalesAid Software dguillett1@austin.rr.com "Gordon" <gwelch1938@yahoo.com> wrote in message news:1184612089.486737.144020@n60g2000hse.googlegroups.com... > My program takes a name from sheet3 goes to sheet1 to Find the na...
Finding an event
Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button, a new window (in same workbook) opens with a new sheet. My problem is that excel does not seem to have any events for close of window if there are multiple windows in a workbook. Can someone help Peter Peter, That triggers the Workbook_WindowActivate event, you can use that. HTH Bob "Peter Ostermann" wrote in message news:i9m5v8$7bv$02$1@news.t-online.com... Hello, I am developing an app that uses a single worksheet to enter data. When user double clicks a button...
Find value in a column and insert rows above
The set up looks like this: ColU ColV ColW ColX Y N N N Y N N N N Y N N N N Y N N N Y N N N Y N N N Y N N N Y Y Columns will always be U through X and will always be sorted in this order. I need to find the first Y in each column and insert 2 rows above that row. On the blank row above the first Y, I need to highlight in yellow and put title in the first cell, such as New, Old, Existing, Deleted. Any help would be greatly appreciated. Thanks for your time, Dee If desired, send your file to my address below. I will only look if: 1. You send a copy of this ...
Sum if Condition is Equal in Range Date and find column
I want to make a sum if Range is a week number and if style is Equal to CONC-92 or CONC-45 Week# 49 Week# 50 CONC-92= 27 CONC-92= 30 CONC-45= 27 CONC-45= 30 Datas are in a pivot table and... Pivot table looks like this: Date CONC-92 CONC-45 CONC-92 CONC-45 12/7 5 5 10 10 12/8 2 2 10 10 12/9 5 5 10 10 12/10 5 5 10 10 please help -- Lorenzo Díaz Cad Technician ...
cannot find database
I have an excel spreadsheet that is supposed to update a access db. Whenever I try to save the .xls I get an error stating cannot find db. Even when I open the db with access, I get the error and the db opens anyway?????? This only happens on 2 out of 20 pc's and I cannot figure out why???????? Thanks ...
Trapping a NO FIND after a find
I use the code below to store a row number to a variable after a find. I would like to trap a NO FIND if the find is unsuccessfull Any ideas. FSt1 provided the code below Sub macfindrow() dim rn as string dim rng as range dim therow as long rn = inputbox("enter something to find") if rn <> "" then Set rng = nothing Set rng = range("A1:IV65536").Find(what:=rn, _ After:=Range("A1"), _ Lookin:=xlformulas, _ Lookat:=xlpart, _ ...
How do I find the out of office reply?
My out of office reply is missing from tools. How can I retrieve it? Out of Office reply <Out of Office reply@discussions.microsoft.com> wrote: > My out of office reply is missing from tools. How can I retrieve it? Unless you are using an Exchange server, you will not have the Out of Office Assistant. See this: http://www.slipstick.com/rules/autoreply.htm -- Brian Tillman ...
Finding numbers in rows and highlighting them
Hi everybody :) I need help. This is a lotto system. I have a spreadsheet with 508 rows and 45 columns. In each row there are 45 numbers mixed (1 to 45). I need a script or some other way to find where particular (drawn) numbers are in each of the 508 rows. If my explanation is not clear please ask for farther clarification. Thank you in advance for your help. Joh -- Johncobb4 ----------------------------------------------------------------------- Johncobb45's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1658 View this thread: http://www.excelforum.com/showt...
How do I find data from a list (or table) and insert it in a row?
I used to use a spreadsheet program (2 years ago) that allowed me to lookup an item and insert it into the worksheet. I know the program was at least a year old at that time (2002). How do I create a list, reference it , and then insert an item into a row of my choice? Example: Make of item, item description, and cost. Does the data go on one worksheet and then get referenced and inserted into the list of another worksheet? If so, how? I can't seem to get any answers by reading books on the subject. I no longer have access to the old workbook from which to study. Maybe that ...
Advanced Find not finding all
"Advanced Find" in Outlook 2007 is not finding all email messages which match the criteria. It finds between 30 and 200 and then stops. I then have to work with those (e.g., delete them) and then click "Find Now" again to find another batch, dozens of times! What is wrong? How do I fix this and find all messages that match the criteria? My typical application is to split the entire contents of my .pst files by date. Do do this I make a copy of the file. In one I delete all messages older than the cutoff date (e.g., 1/1/2007), and in the other I delete all messages yo...
How to: find reason for rejected messages?
I'm trying to find the reason, why certain messages get rejected by our exchange 2000 server. Is there a way to find out? Scenario: pullmail gets mails from pop3 mailboxes from, let's say "internetmailserver.com" and puts it in our exchange server "intranet.com". For most mails it works marvellous but for some mails it just fails and I can only see (output of pullmail command): .... 1 messages waiting << +OK 8488322 octets Message from: some.user@validdomain.com to: user@intranet.com SMTP message rejected, reply OK Unexpected response rsion:...
Can "Totals" be displayed in Advance Find results?
This seems like a question that would've been asked many times before, but I can't find any reference to is here. Can total search results be displayed in the search results pane? The only reference to a solution for this is by a company in Romania called Creative Software Solution. They have a screen grab at http://www.creativesolutions.ro/img/Customizations-GridCount.jpg. Anyone know how I can make the customization myself? Thanks! Andy. Dear Andy, There are few options. 1. Writing Reports and show total 2. Add Total as custom value and use javascript to add that va...
finding latest hotfix
how do I find latest hotfix for Project Server 2007, Sharepoint server 2007 and SQL serve 2005? For Service Pack we can search using bing or google and find. But not for hotfix. How do I find? Thank you Hello all the latest updates are documented here: http://technet.microsoft.com/en-us/office/ee748587.aspx -- Christophe Fiessinger Microsoft http://blogs.msdn.com/chrisfie "sgOrchid" <sgOrchid@@newsgroup.nospam.com> wrote in message news:3B51FE4E-ADD6-415D-9771-CCD32A65DF11@microsoft.com... > how do I find latest hotfix for Project Server 200...
find formula and return value
Hi i am using the following formula to find text in a cell =IF(ISNUMBER(FIND("Super",B96)),"OK", "Not OK") and return a value. i have adapted the formula for another spreadsheet and simply added more values to check, i.e. =IF(ISNUMBER(FIND("Super""Account""Business:,B96)),"OK", "Not OK") but it doesnt seem to work. where i can see the value in the cell it is not returning ok instead of not ok. is there a limit to the number of values i can search and if so why doesnt it say as an error? what am i missing? Thanks v...
"FIND" bar is broken / missing
In IE8, when I click CTRL-F for the "Find on this page" bar, a BLANK bar appears but no controls on it. I uninstalled IE8 and reinstalled it, but it made no difference. Any ideas? I used to use this feature a lot, so this is pretty frustrating. I would appreciate anything you can tell me. Thank you. RecoverfileinRecycleBinwhileinDOS@discussions.microsoft.com wrote: > In IE8, when I click CTRL-F for the "Find on this page" bar, a BLANK bar > appears but no controls on it. I uninstalled IE8 and reinstalled it, but it > made no difference. Any id...
find smallest positive number among datas
How to find the smallest positive number among datas in Excel? Try =MIN(data_rng) -- HTH Bob "Cerberus" <Cerberus@discussions.microsoft.com> wrote in message news:8616B833-5582-4FCE-A23C-5F10D577AF63@microsoft.com... > How to find the smallest positive number among datas in Excel? =MIN(IF(A1:A6>0,A1:A6)) as an array formula (Control Shift Enter) Adjust your range to suit. -- David Biddulph "Cerberus" <Cerberus@discussions.microsoft.com> wrote in message news:8616B833-5582-4FCE-A23C-5F10D577AF63@microsoft.com... > H...
Finding an item in a listview
There has to be a way to find a specific item in a specific column in a listview. I have a list view of people and then I allow the user to pop up a dialog box that allows them to enter search text into a field and it finds all the records that qualify and displays them in a listctrl inside the dialog box and then I want them to be able to click on the record they want and go to that record in the main list view. Yes. Using GetItemText, you can examine the contents of any listview item. Simply iterate through the items and compare each one. In article <OOW30AriDHA.560@tk2msftngp13.p...
Find, Delete row, Loop
Hello, Trying to automate the following: 1. Find a string of characters ("apple") that apprear numerous times in the spreadsheet. 2. When found delete the entire row. 3. Loop until the spreadsheet has no more instances of "Apple" Many Thanks! Dave apple or Apple ?? -- Gary''s Student - gsnu200816 "Dave Coz" wrote: > Hello, > Trying to automate the following: > 1. Find a string of characters ("apple") that apprear numerous times in the > spreadsheet. > 2. When found delete the entire row. > 3. Loop until the spreadsheet h...
How to find PowerPoint version on mac
Hi, In my C++ program I need to find the version of PowerPoint on mac, on windows I am doing this using FileVer.exe. Is there any equivalant of this on mac, Can I use applecsript for this? Thanks in advance Rahul In article <edaa1210-0954-478a-a0e8-6d146726e9f3@f18g2000prf.googlegroups.com>, RAHUL <rsharma.champ@gmail.com> wrote: > Hi, > > In my C++ program I need to find the version of PowerPoint on mac, on > windows I am doing this using FileVer.exe. > > Is there any equivalant of this on mac, Can I use applecsript for > this? > > Thanks in adva...
How do I find...
Ok Question 1: Just finding Basically I need to find all Exchange mailbox enabled AD accounts that are disabled (within AD). (Yes a disabled AD account that has a mailbox.) Within “Active Directory Users and Computers” I can find all mailboxes but I want just the ones who’s AD account is disabled. Question 2: Deleting only the mailbox. Ok once I have the list of these disabled AD accounts that have mailboxes – How can I delete their mailboxes without removing the AD account. (I’m sure there are at least 100 so didn’t want to do this one at a time.) Anyone? Hi You can use "Act...