I want to connect my Sharp Aquos flat screen TV to my computer, and see my desktop on both the TV and computer monitor.
Windows Vista Home Premium.
HP Pavilion a1610n computer.
Galaxy GeForce 8400 GS graphics card, outputs: 1-VGA, 1-DVI, and 1-SVGA. There is no HDMI port on the card.
I connected a VGA cable between the motherboard "on-board" VGA port and the TV, figuring that I could use that output to work with the TV. The computer monitor is plugged into the GeForce graphics card.
Tried the Desktop "Display Setting". It says, the number 2 monitor is "N...Gotta ask one more time ...
Can anyone explain to me how I can create a budget based on my own numbers -
without the program (2003) changing them based on my previous spending?
Isn't the whole point of a budget to STAY within the budgeted limits? I
just can't figure out why the budgeting feature arbitrarily changes my
budgeted values. Even when I start over from scratch, with a new budget, it
just repopulates it the way it wants to - ignoring the numbers I put in to
the budget planner. I have ignored the autobudget altogether. I have clicked
autobudget and unchecked all the values. I have begged and...Display a message box "this entry is a duplicate"
How can I display a message box on a form if the shipment number is a
duplicate? I need a message box to pop up when user attempts to tab out of
Private Sub txtShipNum_BeforeUpdate(Cancel As Integer)
If DCount("*", "MyTable", "ShipNum = '" & Me.txtShipNum & "'") > 0 Then
Msgbox Me.txtShipNum & " already exists."
Cancel = True
This assumes that your text box is named txtShipNum, that the name of the
field in table MyTable is ShipNum...Folder could not be displayed
I am running Windows XP and Outlook Express 6 just fine
then one day my husband does something to my computer and
his email account won't work. My email is working just
fine but in his he cannot open his inbox. It says folder
could not be displayed, and when you send and receive it
gives you this error message:
"An unknown error has occured.
Server:'incoming.verizon.net'.Protocol:POP3, port: 110,
Secure(SSL): No, error number: 0x800C013B"
If anyone could help me with this I would greatly
T...One more TIME
After downloading data it is presented with a decimal(period) between
the hours and minutes i.e.7.20 is really 7 hours and 20 minutes. Some
data appears in hundreds eg 985.35.
I need to compare this data with other correctly formatted timed data
ie 7:20 to establish variances.
I realise that i could use Tools/Autocorrect replacing the decimal
with a colon but this changes the 7.20 to 07:02 and there is the
danger that I might forget to change it back later.
Is there a solution?
Can this be done automatically by macro etc as there is quite a lot of
Thanks in advance.
Hi ...Message Box On One Sheet Only
I have a large spreadsheet with multiple worksheets in it.
When one specific worksheet is selected (it does the calculations used on
the other pages) I would like a pop-up text box to appear warning the user
not to print it.
Is there a relatively easy way to do this given that I can't write VB
(though I can follow it in the VB editor)? I have been able to create a
pop-up that appears on every page by putting an Auto_Open Msgbox in the
ThisWorkbook module, but can't figure out how to get it to work on only one
worksheet - is this a syntax probem or can't it be done?.
Anoth...how to display values in 3 cells into one cell
Anyone can help me how do I display the 3 separate different values in 3
cells into just one single cell ?
thanks so much in advance.
Either there was a typo or there's an echo in here.
That line should have been:
= A1 & " " & B1 & " " & C1
"Bradley Dawson" <email@example.com> wrote in message
> In the target cell, type:
> = A1 & B1 & C1
> where A1, B1, C1 are the cell addresses that you want to concatenate.
> If these have number...How to select & display distinct values
I need help with a form please.
My form has two controls, the first being a combo box. This box should
select the company name from a lookup table. The lookup table has only two
companies in it, however, they each are repeated several time. Company 1 has
about 10 rows, company 2 has 3 rows. I used the query builder and came up
with the statement:
"SELECT DISTINCT Lktbl_Role_Master.CompanyName
When I run the statement directly from query view, it executes perfectly and
returns exactly two rows (one for each company, in a datasheet view) ho...Display Time in Outlook
The time setting in my Outlook is one hour behind my
actual time. I cannot determine how to change the time.
Outlook is the only item that is incorrect. Other display
times in operating system are correct. Thanks, Jodi
...PK and FK Displayed
I am a complete Visio newbie, and cannot find the answer I need in books or
I am trying to create ER diagrams from scratch, and not connected to real
tables, using VEA. I have added tables ('Entities') to the form, connected
them with a Relationship connector, and, in the Database Properties window
I've assigned the end points to a Primary Key on the left and a Foreign Key
on the right. But the model shows the connector as running between the top
colums on both sides, whereas I want the keys to be in that upper box and
provide the connector's end points. Wh...Changing Constants in several macros in one go
For a table macro (see below) I have defined two constants ...
.... strConstantBlue: representing the RGB value for borders,
.... strConstantBlue_2: representing the RGB value for background
I got SEVERAL similar table macros all with the SAME constants, i.e.
.... strConstantBlue and
How can I set NEW values for these two constants in all the affected
macros in one go, using an InputBox?
That is, after entering the new values for the constant
<strConstantBlue>, say (44,33,22), the values for these constants have
to ...Problem writing to 2nd table w/ 1st table's key
Hi everyone. I'm as new to VBA as you can get. Please bear this in mind when
viewing my code. I'm self teaching myself and its not going so well. Anyhow,
I was hoping that someone could explain what I'm doing wrong. I'm working on
a small checklist program that were using out in the field to perform safety
inspections. I set my database up similar to an ordering system in that I
have a table named Inspections which I'm storing the building and owner data
& another table named DeficiencyDetail where I'm attempting to store each
separate deficiency. An inspecti...Maximum of tables that allow to link a report in Report Writer?
Which is the I number maximum of tables that allow to link a report in
"Richard Padilla" wrote:
> Which is the I number maximum of tables that allow to link a report in
> Report Writer?
...Formulas are displayed, results are not
Hello, For some reason, when I enter a formula into a cell and press
enter, the formula just stays there. Anyone know what I can do to show
I tried pressing Cntrl + `, but that didn't work.
FYI, when I cut and paste a column from a separate workbook, that
column works like normal (i.e., the formulas produce results).
Thanks for any suggestions!
Maybe your cell is preformatted as Text.
Try formatting to general then erase your =
and type it in again.
"Mike C" <firstname.lastname@example.org> wrote in message
news:f699bcd4-ad82-4a88-9759-5638c147b...pivot table label adding "2" to the end of a label name
I have a pivot table and sometimes it adds a "2" to the end of a row lable ie.
"joes pizza" is displayed as "joes pizza2".
the sorce data certanly doesn't include the "2" and it seems like it is
trying to tell me some thing ;). It might be hapening after i do a "replace
command" in the source data (replace "sams pizza" with joes Pizza"). any one
The only time I've seen this is when I had multiple headers with the same name.
If I were you, I'd check once more--don't forget to c...Two address/one box
Due to a server crash we made changes to email addresses. Now some people
are not receiving their email. Can we have two email addresses going into
one email box? How? Please be specific as I am new at this.
You can set up an alias for the person within the exchange properties (sorry
can't remember which tab)
> Due to a server crash we made changes to email addresses. Now some people
> are not receiving their email. Can we have two email addresses going into
> one email box? How? Please be specific as I am new at this.
...Stop displaying a line
I have a line graph/chart and it gets its values using a formula and the values of another column. However this poses a problem because if there is nothing in the targetted column the formula returns 0 cause the line to drop to the bottom, instead of casuing the line to just end until a value is added to the target column. How can I do this?
Change your formula to use NA() if the cell is empty. For example:
To hide the resulting #N/A errors on the worksheet, you can use
conditional formatting. There are instructions here:
http://www.contextures.com/xlC...unattached textboxes disappear when a msgbox is displayed on a tab control
I'm using Access 2003.
I have a form with a tab control on it. I was having problems with labels
flashing and I followed the suggesting from Allen Browne -
The flashing went away but now when a msgbox is displayed the unattached
textboxes that I'm using as labels disappear. They come back as soon as the
msgbox is removed from the screen.
I've searched google looking for an answer but have come up short.
Does anyone know why I'm experiencing this behavior and how to make it go
That *is* strange. Have you tr...A question about Console window(display or not display)
I've redirected the (stdin stdout stderr) of a console window process
I spawned to a pipe.
And I want to display the redirected console window, the question is:
If I display it(set Create_new_CONSOLE in createprocess and some flags
in startupinfo), I cannot use the redirected way of pipe, which means
if i do not display, i can use the pipe communicating with the child
Does it mean that as long as I disply the console window, windows will
change stdin stdout to "screen&keyboard" instead of my pipe?
That's right. If you redirect stdin or stdout then you preemp...Display or not display series
I have a graph with four series but some of the series may
be blank, i.e. the series name is <blank series>. Is
there a way to not display these series on the graph
and/or legend if they are blank, and display them if they
are without deleting the series?
Create a chart from all the data
Select the data on which the chart is based.
In the heading cell for the series name column, select (NonBlanks)
from the dropdown list
The series with blank name cells will be hidden in the chart.
> I have a graph with four serie...does Excel support multiple display monitors?
Hello All Excel Experts
How do I move chart windows to multiple display montors?? (one
computer runnng three monitors... Excel Charts will not
move off the primary monitor.
Your advice is EXTREMELY appreciated
...Displaying an equation
I have an equation setup that is referencing a few other cells that have
equations in them. I want to have a cell that displays this equation with the
answers that are calculated from these other cells displayed as values in the
new equation. Any help would be greatly appreciated. Thanks
In article <E4143E2B-360A-4B43-955F-73BF8EC60694@microsoft.com>,
"hoising8" <email@example.com> wrote:
> I have an equation setup that is referencing a few other cells that have
> eq...cannot find table save operation failed
when i try to go thru different jounal entries am geting the message
a save operation on table 'glTaxWork' cannot find the table
A general query
Im serialising a person object with the following member variables
Private _forenames As String
Private _surname As String
Private _dob As Date
Private _marital_status As MaritalStatus
'Public Get and Set Properties here for each of the above
' I'll not detail them all to save space but Ill show attributes
<XmlElementAttribute(Elementname:="dob"...One place where deleted investments still lurk
Last week I found something that may only be of interest to ppl that are
extremely anal-retentive about keeping their Money files as clean as
Although newer versions of Money allow investments to be deleted (older
versions only hid such investments) I recently found one place where deleted
investments are still listed.
When setting up an option using "Other" for underlying interest type, I'm
given a drop-down to select the underlying interest from a list in order of
creation (most such drop-downs are in alphabetical order) which lists
long-dead investments that...