Counting records and Where criteria

I'm trying to count the number of records between date parameters. I have a 
query that I'm using the Count function to count the number of txtrefnbr and 
in the Criteria I've used
Where [txtdaterecd]=Between [Forms]![frmdates]![txtfrom] And 
But I get an invalid syntax error. Anyone help?

9/21/2007 3:16:32 PM
access.queries 6343 articles. 1 followers. Follow

1 Replies

Similar Articles

[PageSpeed] 56

What is [txtdaterecd]?

If it is a field in a table, when you open the table in design view, is it a 
Date/Time field?

If it is a calculated query field, wrap the calculation in CVDate() so 
Access understands the data type.

If txtfrom and txtto are unbound text boxes, set the Format property to 
Short Date (or similar) so Access understands the data type.

Explanation of why in this article:
    Calculated fields misinterpreted

Allen Browne - Microsoft MVP.  Perth, Western Australia
Tips for Access users -
Reply to group, rather than allenbrowne at mvps dot org.

"Tony Williams" <> wrote in message
> I'm trying to count the number of records between date parameters. I have 
> a query that I'm using the Count function to count the number of txtrefnbr 
> and in the Criteria I've used
> Where [txtdaterecd]=Between [Forms]![frmdates]![txtfrom] And 
> [Forms]![frmdates]![txtto]
> But I get an invalid syntax error. Anyone help?
> Thanks
> Tony 

9/21/2007 3:29:01 PM

Similar Artilces:

Using form to enter "query criteria" (between values)
Good morning everyone, I want to create a form with two boxes, where first box is lower limit of the value and the second upper limit. This values should be used in my query as filter criteria. Like this (query filter criteria): > "textbox1" AND < "textbox2" Does anyone know how I can build this in a form (i.e. connect my textboxes and query criteria)? Kindly, Mikael Sweden By thinking about for another minute I found the (simple) answer. In the query criteria I put the following expression: BETWEEN [forms].[nameofform].[NameofDatefield1] AND [forms].[name...

Pivot table and counting.
I have a pivot table that gives me the number of rides done by a van. I can have the pivot table return the number of rides, but what I need is the number vans that participated for a certain day. Example, it is possible to have 27 trips done by 18 vans, how can I count the number of vans and not addup the van number? Any help appreciated. Thank you, Joe Hi Joe We need a bit more information on how your source data table is set up. What information do you have in each column? -- Regards Roger Govier sacredarms <> wrote: > I have a pi...

Cycle Counting
Hello, I am looking for ideas on how to cycle count serial number tracked items without increasing workload. Our serialized items are barcoded but the problem is the are situated on the pallet incorrectly and the pallet is placed on a third level of a racking system. If we could just cycle count based on item count and not include the serial number it would make it easy. Is this possible in Great Plains. We are running Great Plains 8.0. Any suggestions are greatly aprreciated. Thank You, Brian Morris Database Administrator ...

Hi, I would like to know how which formula I should use to count some codes & to ignore the duplicated codes, for example in column A: Code 1234 4321 4321 1234 1234 3214 Now, I want Excel to count & the result is 3 which are: 1234-4321-3214 Yes I can use PivotTable, but I would like to use a formula because I have to deal with this every day. I appreciate your support. -- MFS22 COUNTIF will do it. =COUNTIF(Rng,Rng), where the criterion is the same as the range: e.g =COUNTIF(A3:A8,A3:A8) HTH Peter "MFS" wrote: > Hi, > I wo...

How do I count the # of times a value reoccurs and plot it over ti
I wish to plot a number of errors made by each users and compare it over time. I have a column of user ID's and a column of dates. I want the chart to count the number of times each user ID appears and plot against it's corresponding date. However, each time I try to do this, the chart appears wrong. Any ideas? In article <>, says... > I wish to plot a number of errors made by each users and compare it over > time. I have a column of user ID's and a column of dates. I want t...

Line count
I am working with a program called Dictaphone. We use Word 2007 in this program. The line count on Dictaphone and the line count in Word 2007 are different even though the Dictaphone text is retrieved from Word 2007. Why would they be different? What is the difference between virutal line count and physical line count? ...

count number of characters in rich edit control
How can i count number of characters in rich edit control 2 If u mean controls of type Rich TextBox control, try RichControl1 RC1; CString Mes=RC.GetText(); int n=Mes.GetLength(); "Rahul" <> wrote in message > How can i count number of characters in rich edit control 2 EM_GETTEXTLENGTHEX, WM_GETTEXTLENGTH, WM_GETTEXT, EM_STREAM* "Rahul" <> wrote in message > How can i co...

Counting sales
I have two different datasets. Each with a common identifier. I need a formula that will reference the identifiers in both datasets and count the number of sales a particular agent made. Example. look up this identifier in the other dataset and then give me the value that is 2 columns over from the identifier in the second dataset. See if this helps: -- Biff Microsoft Excel MVP "Dave" <> wrote in message >I have two...

COUNT ? need formula
Hi, I want to track the results of my teams sales performance. I record if it is a sale, no sale, cancelled etc in column M. I thought I'd be able to use the COUNT function/formula to be able to search for all the SALES in column M and place the result in a cell ( column O )but I can't work it out. Any ideas? Damian Hi! Try this: =COUNTIF(M1:M100,"sale") Biff "Diamond Jones" <> wrote in message news:43a0e897$0$17704$ > Hi, > > I want to track the results of my teams sales perf...

Counting Cells with Conditional Formatting
Is there a way to look at a row of data that is either highlighted yellow or red and to count only the data that is highlighted yellow and give me that number? None of my data is numerical....just one letter data, i.e.: "S" or "U" I just want to count how many of the cells are highlighted yellow in a specific row, if that makes more sense. Here's a UDF (Put in a Standard module) and use it in cell A1, like =CountByColor(A8:H8,6) << where 6 (at present) = Yellow = change to =CountByColor(A8:H8,3) to get the reds HTH Function CountByColor(InRa...

Count Function
I am creating a report for the number of pupils being collected at a certain collection time e.g. 14:00hr and 15:00hrs using the formula =Count([Child Last Name]) in the collection time footer However when i try to count the overall number of pupils in the footer using the same formula, 'Error' appears on screen? Thanks There are potentially a dozen footer sections in a report. Which one is giving you a problem? What is the name of the control? What is the exact formula? -- Duane Hookom Microsoft Access MVP "ELo" wrote: > I am creating a r...

Counting a count
How do I count a count?? This is what im trying to do: I have a database with a table named tblMain and has incorporated everything within that table but contains info from about 8 other tables. I have not doesigned this database and it appears to have a very poor structure...anyway There are three fields involved in this process...'Request' (either 'dispensation', 'waiver' or 'dispensation and waiver'), 'Department' (which consists of 7 other drop down menu options) and 'RequestStatus' which contains the status of each request by another...

Recording Administrative Fee on 401(k) in Money 2007
What is the appropriate way to record an administrative fee charged to shares on a 401(k) in Money 2007 - an "Other Expense" doesn't allow for a change in shares and faking out the software by entering a negative "Reinvested Capital Gaines" doesn't work either. Thanks, Phil D. I do a Sell to the Cash Account followed by an Expense (Miscellaneous:Service Charges & Fees or similar) in the Cash Account. I'm assuming you are not wanting to do the Sell. Why not? "Phil" <> wrote in message news:1168372938.333254.7351...

Count Problem
Hi I have 20 cells in a single column in a sheet called "Audits" All the cells have a formula in them. The formula is a simple one that reads whatever I put into a cell on a different worksheet called "Names" ie: =Names!A1 = Names!A2 etc etc I would like to have a formula that counts up all the results I get in the sheet called "Audits" At the moment if I enter (let say) 15 names in the "Names" sheet the result is that I see the same 15 names in the "Audits" sheet, however the COUNTA formula returns a total of 20. SO obviously...

unique or distinct count from xml
How to get a unique count from a xml <Orders> <Order ID="1111" Amount="200"></Order> <Order ID= "2222" Amount="10"></Order> <Order ID="3333" Amount="5"></Order> <Order ID="1111" Amount="20"></Order> </Orders> The result should be 3 unique count and the 4 Order Id counts. How can i get using XPathNodeIterator using Compile,Execute with a XPathNavigator thanks you bhu The XPath expression for that is count(Orders/Order[not(@ID=preceding-sibling::Or...

How can I search for and display actual record numbers in Access?
I have a form that has several fields to save data in for achieve purposes. I also have a search form that pulls that data and displays it, each in an individual line. It would be ideal to be able to click on a search result and then on the main form have that record be displayed. I do not know how to do that, so I was hoping to just be able to display the record number in the search results so that you can just type it in the main form and go right to that record number. I am unable to do that either, I tried several combinations of displaying something like me.currentrecord for ...

Displaying proper web site for record
Hi, I would like to have the proper web site display inside the Web Browser control on a form when I am navigating through records. The url is in a text field with the table associated with the form. So far I have only been able to get the web site to appear by visibly placing the url on the form in a text and using a on click event as such: Private Sub Homepage_Click() WebBrowser2.Navigate (Homepage.Text) End Sub Not very elegant but I cannot figure how to get access to do this on its own when I change records. Thanks for the help, Steve. Steve, try setting your textbox format...

Replace Count
I am using this routine to replace characters in a large text string. I would like to know how many replacements have been made. This is a generalized routine for experimenting. If I set lReplCount = 1, I can get a count but it takes over one minute to run. If I set lReplCount = -1, it takes about 20 mSec but I get no count (except 1). Is there any way to get speed and the replace count? I would be happy with a few seconds and an accurate count. Do If InStr(1, sText, vbCr & vbCr) > 0 Then lChangeCount = lChangeCount + 1 ...

Smart List record count in 10.0 SP2
Hello, I'm wondering if anyone else has seen a situation in the standard smart list for Purchase Line Items returns a different line count in the window than on the bottom of the window in the status bar. For instance, a client requested a search using the view "Today's Expected Receipts", so the window shows 4 rows, but the status bar at the bottom shows 8. The search criteria look to be the same as in my local view. Trying it in my local view, I get the same results for other views under this object, for instance the window shows 13 rows, but the status bar shows ...

Counting text cells #3
I have a range of cells A25:A256 that contain text entries of various types (doesn't matter). How do I get it in cell A258 to give me a total of cells that have text in them within that range 25:256 Thanks, Gurus Jessica =SUMPRODUCT(--(ISTEXT(A25:A256))) -- Regards, Peo Sjoblom "Jessica Walton" <> wrote in message > I have a range of cells A25:A256 that contain text entries of various types (doesn't matter). How do I get it in cell A258 to give me a total of cells that have ...

2 questions regarding count formula
If I have the following data A B C 1 Personnel group type p't number 2 Melinda 1 4 3 Sean 1 5 4 Melinda 1 6 5 Sean 2 30 6 Fay 3 8 7 Melinda 1 32 1. How shall I contruct my formula to count the number of data that satisfy the following criteria: 1. personnel is Melinda 2. group type is 1 3. ...

Cycle Count
Hi, Client running GP 10. I am setting up their cycle count schedules and have run into an issue that I can't get an answer for. Want to set up the count to give me the following quantity of items to count weekly: A - 15 Items B - 10 Items C - 5 Items I am unable to find a way to automate this. Any suggestions (besides buying other count software?). -- Jim Lines Sr. Microsoft Dynamics GP Applications Consultant Certified Microsoft Dynamics GP Specialist I don't think so Jim. The assumption behind cycle counting is that you'll count all your inventory at least once annual...

I have a report that I have been emailing help on with you guys. Everyone has been such a great help. My report is a 12 month rolling report, which is based off of a crosstab query. I need a field called count. This will count what months have data in them. So for example: Item Mth1 Mth2 Mth3 Mth4 Mth5 Mth6 Mth7 Mth8 Mth9 Mth10 Mth11 Cnt 12 2 0 0 0 0 3 3 6 2 0 6 The count being which months are > 0. Do I create this in my query or better off in my report? Thanks in advance KimP -- Message posted ...

Replacing data in multiple records
I have a field that needs to be changed in multiple records - how do I do that? Goldmine had the Globally Replace option - is there something similar in CRM? -- TWhelan Not globally, but you can select multiple records in a view and select Edit from the More Actions toolbar button. It allows you to change one ore more field values of all selected items. -- Michael H�hne, Microsoft Dynamics CRM MVP CRM Blog: ---------------------------------------------------------- "TWhelan" <> schrieb im Newsbeitrag ne...

Filter Records after FindRecord
I created a cboQuickSearch combo box, where I can choose the field I would like to search on. The txtSearchBox text field is where I enter the search data. I have three issues: 1. I would like to filter the records once found. 2. I want to be able to enter a few characters instead of having to enter the whole word. 3. Is there shorter code to do the same thing? Below is the code I created: Private Sub txtSearchBox_AfterUpdate() If Me.cboQuickSearch.Value = 1 Then ' Company ID Me.txtCompanyID.SetFocus If Not I...