Calling Dex Procedures from SQL
Is there any way to call dex procs from SQL or VB code?
There is an undocumented and unsupported method of calling Dex code from
VBA. However, I know of no method of calling Dexterity from SQL.
Please email me if you want an example, just remove the online. from the
David Musgrave [MSFT]
Senior Development Consultant
MBS Services - Asia Pacific
Microsoft Business Solutions
Any views contained within are my personal views and
not necessarily Microsoft Business Solutions policy.
This p...is SQL 2000 architecture different SQL Server 2005 / 2008 architecture?
Hi I have a book "inside SQL Server 2000" by Kalen Delaney, which I
have been told is a good book. I am going backwards... reading about
the sql server architecture in chapter 3 of the book.
As I'm reading... I was wondering is it different SQL Server 2000 vs
SQL Server 2005/2008? Also
where can I find a book/or link that can give me more details about
the internals on architecture?
norm (email@example.com) writes:
> Hi I have a book "inside SQL Server 2000" by Kalen Delaney, which I
> have been told is a good book. I am g...Moving customizations from SQL 2k to SQL 2k5 CRM
This may be a non-issue but I wanted to check to see if anyone has done this
and ran into issues.
I have the XML customization files from our previous install of CRM 3.0 with
SQL 2k database. I now want to import and publish these same customizations
to CRM 3.0 on SQL 2k5.
Has anyone done this or can point me to documentation that tells about the
success or issues for doing this?
On 7 Feb., 06:35, Chris Treanor
> This may be a non-issue but I wanted to check to see if anyone has done this
> and ran into issues.
&...CRM 3.0 Install Error with SQL Reporting Services and SQL 2005
Doing a CRM 3.0 Server installation. During the last page of the install
wizard (or what I assume is the last page) when I goes through and does
verification I get a red X next to SQL Reporting Services. The message I
receive when I look at the details is:
The specified path is not a metabase path.
Parameter name: path
Now SRS is installed and working. I put in the URL:
http://<servername>/reportserver and every other variation on that I can
also assuming you did not use ssl...
=======================...SQL 'for xml' and C# example??
I'm missing some piece of the puzzle. I'm using 'for xml' type queries from
SQL2K - and now trying to change the front-end from ADO to C#, I can't quite
figure it out..
It seems that I could use an XmlReader.. and somehow use that instead of a
DataReader.. but that didn't work.. I tried using a DataReader and get the
byte array - but that wasn't right.
SQL returns formatted XML, I need to load that XML into an XmlDocument
somehow without ANY molestation of that dom. Any ideas? Examples? Missing
THANKS!! I've been looking for the answer to ...sql summarizing help
id, cdate, weeksago, amount, typeid, timeclose
496, 2010-02-11, 0, 450, 3, 1
490, 2010-02-01, 1, 200, 4, 1
491, 2010-02-01, 1, 350, 2, 2
493, 2010-02-01, 1, 500, 5, 1
489, 2010-01-21, 3, 150, 2, 1
136, 2010-01-12, 4, 500, 3, 2
137, 2010-01-12, 4, 100, 3, 1
138, 2010-01-12, 4, 500, 2, 1
1. i'm trying to create a sql that will give me a summary resultset grouped
2. i want to sum the columns and get counts based on typeid.
3. avg of timeclose
here's the sql i have:
, (sum(timeClose)/(count(timeclo...Update multivalue field in table from form with SQL
Access 2007 on Vista
I am using a form to establish the variables for a report before it is
created. One field on the underlying table is a multivalue field, and the
form includes a multi-select combo box control. After selections are made and
the OK button on the multi-select combo drop down is clicked, focus moves to
the next control. I have discovered though, that the underlying table does
not update immediately, but does so correctly when I close the form. This
sequence does not deliver the proper report data, so I need a way to
immediately update the underlying table (m...Refer to SQL statements globally
I have two large SQL statements that I need to use across several
forms, reports, etc.
Rather than repeat them in each form, I'm trying to store and
reference them globally.
For example, I'd like to store strSQL1 and strSQL2 in a global module,
so I can use either like this in a form:
Me!lstResults.RowSource = strSQL1
Me.Report.RecordSource = strSQL2
Would I just store the SQL statements in a global module like:
Public Function SQLSource() As String
Dim strSQL1 As String
Dim strSQL2 As String
strSQL1 = "SELECT blah blah...To SQL or not to SQL?
I have a very vertical product developed 100% in M/S Access. I developed it
myself in 1993 in the initial release of Access and been with it ever since.
It is currently very stable and running in Access 2003. My big question is
how or even *if* we should move it to SQL. My customers are getting bigger
all the time with more users. Typically our customers run one or two
workstations generally never more than 5. Performance, however, is starting
to slow with database sizes passing 500 meg. We also have a LOT of code
behind forms so are bound tightly to the Access development environ...PostgreSQL or other SQL servers in RMS
Has anyone successfully implemented RMS with one of the free SQL servers?
Theoretically, is there any reason why we have to use MS SQL Server 2000 for
"dh" <firstname.lastname@example.org> ha scritto nel messaggio
> Has anyone successfully implemented RMS with one of the free SQL servers?
> Theoretically, is there any reason why we have to use MS SQL Server 2000
> large databases?
RMS has implemented only for MS SQL Server (2000/MSDE) and isn't possible to
work with ano...writeback to SQL 2005
hello! I use excel 2007
iI open a connection agianst SQL server 2005 and choose a table. In my
workbook i can now see this data from this table. if i change a value in some
cell i wish to writeback to table in SQL server. Is this possible?
It's possible through the use of VBA and ADO, but not simply using the data
connection you've already established.
"CJ" <CJ@discussions.microsoft.com> wrote in message
> hello! I use excel 2007
> iI open a connection agianst SQL server 2005 and choose a table...sql.request #2
Does anyone have a comprehensible guide on how to use it that a dolt like me
can follow? Every time I try I get a #N/A.
The only guide I can find is at
http://www.bygsoftware.com/examples/zipfiles/UsingSqlRequest.zip but it's
really hard to follow.
From the MSDN Library:
Not sure how familiar you are with ODBC; but if you are getting #N/A as a
result, it is usually because of problems either with the SQL syntax or the
connection string. There are a few examples of connection strings in the
re...MSDE or SQL Personal or SQL Developer? or SQL Workstation?
Hi, which one is better for personal non-server computer? MSDE? SQL Personal?
SQL Developer? SQL Workstation?
It depends on what edition of GP you are going to run. If you are going to
use Professional, you need to go with SQL Server developer, assuming you are
installing on a non-server OS.
> Hi, which one is better for personal non-server computer? MSDE? SQL Personal?
> SQL Developer? SQL Workstation?
> Thank you.
Is the function of SQL Developer the same as Enterprise edition?
How about personal edition? Can it be used for GP Pro?
Can dev...Excel RoundUp in Transact-SQL
Last week I posted the following computation in Excel...
roundup(roundup(rate * 500),4)
- roundup(rate * 200,4) + polfee,2)
((6.108934 * (500000/1000)) - (200 * 6.108934) + 1311.51) = 3144.20
In SQL using round(num,4) = 3144.19
I've moded this to... round(num+0.0005,4) = 3144.20
This works most of the time but occasionally I'm still off from what Excel
I'm under 2% in my 342 calcs, so it's do-able and we'll explain if any
client notes this that we've reduced their pmt by .01 cents.
BUT, I'd still like a way to replicate Excel'...Find/Search in Formulas
I have two workbooks - one with data downloaded from an external source
into a sheet for each of the 12 months - another with sheets that refer
to that data and perform calulations, etc. for each month. I need to
create two new sheets to use in 2006 instead of 2005, so I want to
rename the workbooks, the sheets, and all the references in the cells -
basically just replace 2005 with 2006 at all levels.
I did a <Save As> for each workbook with the new year in the name, and
went into the data workbook and renamed the <Jan05> sheet to <Jan06>.
Then I went into the calculation wo...Access frontend with SQL Server backend: my solution for ODBC Call error
This thread follows threads I started in forums
microsoft.public.access.forms, and microsoft.sqlserver.programming:
1. 'Overriding constraint violation message' at 21.04.2010 12:00;
2. 'Overriding constraint restriction message, when deleting record(s) from
form' at 29.04.2010 10:36.
The problem (Occurs in Access 2000 mdb as stated by MS and in Access 2007
mdb as I myself discovered):
When record operation is aborted from SQL Server, Access gets the full
information about error, but this info gets unaccessible at moment when
OnError event is triggered. The...SQL
i am new in Sql express i am trying to create a database in sql but i dont
now how can i install the database in other computer or a server
programmatically where the other computer have the sql and if is a server
what i nead to do .
or only what i need is a valid conection ;
i use the localhots to identify any clinte machine but i dont now what i
need to writh for the servers
my conection is look like this as a defualt from MFC
hr = _db.OpenFromInitializationString(L"Provider=SQLOLEDB.1;Integrated
Security=SSPI;Persist Security Info=False;Initial Catalog=Data.mdf;Data
Sour...GP 9.0 on SQL 2008
MBS has said GP 10 is supported on SQL Server 2008. However there is no
information on support for GP 9.0 on SQL 2008. Does anyone have any
real-world experience running GP 9.0 on SQL 2008 in a production environment?
Dynamics GP 9.0 is not supported on Microsoft SQL Server 2008. This is an
excerpt from the System Requirements page.
MSDE 2000 SP 4
Microsoft SQL Server 2000 Enterprise Edition SP 4
Microsoft SQL Server 2000 Standard Edition SP 4
Microsoft SQL Server 2000 Workgroup Edition SP 4
Microsoft SQL Server 2000 (64-bit) SP 4
Microsoft SQL Serve...SQL Study Group
Please join for support our SQL Study Group
For those who want to join, the URL is
David Musgrave [MSFT]
Escalation Engineer - Microsoft Dynamics GP
Microsoft Dynamics Support - Asia Pacific
Microsoft Dynamics (formerly Microsoft Business Solutions)
Any views contained within are my personal views a...SQL 2008 and SRS
I am using SQL 2005 with CRM 4.0 on one box and have to move CRM and SQL to
seperate boxes. The SQL box will have SQL 2008 Standard. The consultant
who will be doing the SQL work reminded me to install SRS. Is SRS included
with SQL 2008 Standard?
SQL Server Reporting Services (SSRS) is part of 2008 Standard Edition.
"John" <email@example.com> wrote in message
>I am using SQL 2005 with CRM 4.0 on one box and have to move CRM and SQL to
>seperate boxes. The SQL box will have SQL 2...IM with SQL 2000 to SQL 2005
Can IM be used to take data from an SQL 2000 database for use with GP 8.0
running on SQL 2005.
Basilcy I need to extract order information from a website running on SQL
2000 and insert in in GP 8.0
Yes, you can use SQL Server 2000 databases as a data source for Integration
Manager with GP 8 running on SQL 2000/2005.
Charles Allen, MVP
> Can IM be used to take data from an SQL 2000 database for use with GP 8.0
> running on SQL 2005.
> Basilcy I need to extract order information from a website running on SQL
> 2...T-SQL to PL-SQL
Hello, can sombody help me to translate that script in oracle?
DECLARE @ID INT
DECLARE CURSEURS_JOBS CURSOR FOR
SELECT REF_RE_JOB_POSTING_ID FROM DM_RE_JOB_POSTING
FETCH CURSEURS_JOBS INTO @ID
WHILE @@FETCH_STATUS = 0
update DM_RE_JOB_POSTING set publishedI = (select CASE
WHEN rjpd.internal = 1 and (rjp.internal_external in ('B','I'))
WHEN rjpd.start_date is null and rjpd.end_date is not null and
rjpd.end_date >= getdate()
WHEN rjpd.start_date is...debug sql, Watch, Command Window, see cotent
I know how to get into debug mode, place break point etc in a stroed proc in
SQL Server Management Studio.
But after it hits a break print, what actions I can take to peek the data?
e.g. I try to see a temp table has just been populated?
I can not put "select top 1 col1 from #tempTable1" in watch list. It says it
could not be evalulated
I can not execute it in Command window.
How can I look at data? How can I execute addintion sql statements?
What command supported in "Command Window"?
The easiest way is put a SELECT statement in you...Use the OBDC that GP10 creates when in SQL 2005
Some time back, when we first installed GP10 in our SQL2000, we were
recommeded NOT to use the ODBC that GP10 created.
We just upgraded to SQL2005 and fully installed all SPs. We also made clean
install of GP10 under this engine.
Should we the ODBC created by GP, or still use the use the same
configuration of ODBC SQL2000?
Is ther a link where we can click to and see step by step to create a proper
ODBC for GP10?
...upgrading from SQL 2000 to SQL 2005 with a clean install of CRM 3.
I just finished installing SBS 2003 and SQL 2000 along with CRM 3.0 no data
or customization has been done in CRM. Then I received the SBS 2003 R2 disk,
which has what I originally want SQL 2005. So now I have 2 instances of SQL
running and CRM is attached to SQL 2000.
My ? is how do I get CRM to recognize SQL 2005. Can I uninstall CRM, then
uninstall SQL 2000, then reinstall CRM?
What can I do.
Ticket Angels Traffic Ticket Defense
Did you install Windows SBS 2003 R2 in a different server or you did an
upgrade to the existing server and have SQL ...